硕士邦德聚合物体系EP15是一种单组分热固化环氧树脂具有较高的拉伸强度是在测试粘连或火焰喷涂涂料粘结强度利用。 本标准测试完全详细ASTM规范彗星633。 EP15是配方治愈300 ° F的温度为60-90分钟至350 ° F。 治愈后，EP15具有良好的拉伸强度超过12000磅。 EP15形式与固化后收缩率最小的刚性，尺寸稳定债券。 它是100％反应，不含有任何溶剂或稀释剂。 工作温度范围为-60 ° F至400 ° F。 作为一种单组分环氧树脂，硕士邦德聚合物体系EP15很容易处理，因为它不需要事先混合使用，具有无限的工作在室温下生活。 它的债券以及向承印物种类繁多，但最相关的是它非常良好的附着力，对金属，陶瓷，特别是那些火焰喷。 标准颜色为棕褐色。 虽然主要是在测试中使用火焰sparyed涂层，EP15也可以用来在任何Bonding应用领域需要高强度的前提。

Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures from 300°F to 350°F for 60-90 minutes. Upon cure, EP15 has a tensile strength well in excess of 12,000 psi. EP15 forms rigid and dimensionally stable bonds with minimal shrinkage upon cure. It is 100% reactive and does not contain any solvents or diluents. Service temperature range is -60°F to 400°F. As a one component epoxy, Master Bond Polymer System EP15 is easy to handle as it does not require mixing prior to use and has an unlimited working life at room temperature. It bonds well to a wide variety of substrates, but most pertinent is its exceptionally good adhesion to metals and ceramics especially those that are flame-sprayed. The standard color is tan. Although primarily used in the flame sparyed coating test, EP15 can also be utilized in any bonding application where high tensile strength is a prerequisite.

硕士邦德聚合物体系EP15是一种单组分热固化环氧树脂具有较高的拉伸强度是在测试粘连或火焰喷涂涂料粘结强度利用。 本标准测试完全详细ASTM规范彗星633。 EP15是配方治愈300 ° F的温度为60-90分钟至350 ° F。 治愈后，EP15具有良好的拉伸强度超过12000磅。 EP15形式与固化后收缩率最小的刚性，尺寸稳定债券。 它是100％反应，不含有任何溶剂或稀释剂。 工作温度范围为-60 ° F至400 ° F。 作为一种单组分环氧树脂，硕士邦德聚合物体系EP15很容易处理，因为它不需要事先混合使用，具有无限的工作在室温下生活。 它的债券以及向承印物种类繁多，但最相关的是它非常良好的附着力，对金属，陶瓷，特别是那些火焰喷。 标准颜色为棕褐色。 虽然主要是在测试中使用火焰sparyed涂层，EP15也可以用来在任何Bonding应用领域需要高强度的前提。

Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures from 300°F to 350°F for 60-90 minutes. Upon cure, EP15 has a tensile strength well in excess of 12,000 psi. EP15 forms rigid and dimensionally stable bonds with minimal shrinkage upon cure. It is 100% reactive and does not contain any solvents or diluents. Service temperature range is -60°F to 400°F. As a one component epoxy, Master Bond Polymer System EP15 is easy to handle as it does not require mixing prior to use and has an unlimited working life at room temperature. It bonds well to a wide variety of substrates, but most pertinent is its exceptionally good adhesion to metals and ceramics especially those that are flame-sprayed. The standard color is tan. Although primarily used in the flame sparyed coating test, EP15 can also be utilized in any bonding application where high tensile strength is a prerequisite.

硕士邦德聚合物体系EP15是一种单组分热固化环氧树脂具有较高的拉伸强度是在测试粘连或火焰喷涂涂料粘结强度利用。 本标准测试完全详细ASTM规范彗星633。 EP15是配方治愈300 ° F的温度为60-90分钟至350 ° F。 治愈后，EP15具有良好的拉伸强度超过12000磅。 EP15形式与固化后收缩率最小的刚性，尺寸稳定债券。 它是100％反应，不含有任何溶剂或稀释剂。 工作温度范围为-60 ° F至400 ° F。 作为一种单组分环氧树脂，硕士邦德聚合物体系EP15很容易处理，因为它不需要事先混合使用，具有无限的工作在室温下生活。 它的债券以及向承印物种类繁多，但最相关的是它非常良好的附着力，对金属，陶瓷，特别是那些火焰喷。 标准颜色为棕褐色。 虽然主要是在测试中使用火焰sparyed涂层，EP15也可以用来在任何Bonding应用领域需要高强度的前提。

Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures from 300°F to 350°F for 60-90 minutes. Upon cure, EP15 has a tensile strength well in excess of 12,000 psi. EP15 forms rigid and dimensionally stable bonds with minimal shrinkage upon cure. It is 100% reactive and does not contain any solvents or diluents. Service temperature range is -60°F to 400°F. As a one component epoxy, Master Bond Polymer System EP15 is easy to handle as it does not require mixing prior to use and has an unlimited working life at room temperature. It bonds well to a wide variety of substrates, but most pertinent is its exceptionally good adhesion to metals and ceramics especially those that are flame-sprayed. The standard color is tan. Although primarily used in the flame sparyed coating test, EP15 can also be utilized in any bonding application where high tensile strength is a prerequisite.