Epoxy adhesive / single-component / heat-curing EP3HTMed 环氧树脂胶粘剂、单组分热固化ep3htmed
Characteristics
特点
Chemical composition:
化学成分：
epoxy
环氧树脂
Number of components:
零件编号：
single-component
单组分
Technical characteristics:
技术特点：
heat-curing
热固化
Description
描述
EP3HTMed epoxy solution is a bonding system that enables versatile applications including sealing, coating, and sticking. It allows quick fix at minimum amount of time, consuming just 5 to 10 minutes at 300 degrees Fahrenheit and 20 to 30 minutes at 250 degrees Fahrenheit. It also exudes a strong shearing characteristic, with critical tolerance to autoclaving, chemical sterilants, radiation and Eto. It is a single-component concoction with independent bonding capacity. It operates infinitely at normal room thermal condition, and enables minimum cure at 250°F temperature, with a vast array of thermal adaptability that ranges between -60°F to 400°F.
ep3htmed环氧溶液粘接系统，使通用的应用包括密封、涂料、贴。它允许快速修复的时间最少，只消耗5到300分钟，在华氏10度和20到250分钟，在华氏30度。它还散发出强烈的剪切特性，用灭菌，关键性化学消毒剂，辐射和ETO。它是一个独立的键合能力的单组分的混合物。它工作在正常的房间的热条件下，在250华氏温度，并使最小的治疗温度，与一个广泛的热适应性，范围在60至400华氏F.之间。
Its consistency allows even and smooth spread, and requires minimum requirement during the curing process, with contact pressure only needed in heat treatment.
它的一致性允许均匀，光滑的扩散，并要求在固化过程中的最低要求，只需要在热处理的接触压力。
Epoxy adhesive / single-component / heat-curing EP3HTMed 环氧树脂胶粘剂、单组分热固化ep3htmed