硕士邦德高分子胶粘剂EP21TPND是双组份聚硫/环氧基胶粘剂/配方，固化在室温或高温下更迅速，具有100至100混合比例按重量（A / B），密封胶。 它易于开发了超过1000磅在室温下它不像其他许多环氧粘合剂，是相对不敏感，混合比或基板清洗程序粘接强度高。 硕士邦德高分子胶粘剂/密封胶EP21TPND可应用于无下垂或垂直的表面上，甚至滴水。 它产生在-60 ° F极宽的温度范围内长期高强度和坚韧，灵活的债券和海豹是显着的抗热循环和包括水，油和大多数有机溶剂的化学品，到250 ° F。 粘附于金属，玻璃，陶瓷，木材，橡胶硫化和许多塑料是非常好的。 硬化胶粘剂/密封胶是一种绝缘体。 A部分颜色灰色，B部分琥珀。 硕士邦德EP21TPND胶粘剂/密封剂，广泛应用于电子，电气，计算机，建筑，金属加工，家电，汽车，化工等行业。 EP21TPND和相关系统已成功地为油箱密封剂使用多年！ 固化后的复合型完全符合聚硫/环氧型密封胶的要求。 它也可作为中等粘度可流动的液体可用; EP21TP（粘度50000厘泊），或低粘度（5,000 CPS）系统调用EP21TPLV。

Master Bond Polymer Adhesive EP21TPND is a two component polysulfide/epoxy based adhesive/ sealant formulated to cure at room temperature or more rapidly at elevated temperatures, with a 100 to 100 mix ratio (A/B) by weight. It readily develops a high bonding strength of more than 1000 psi at room temperature which unlike that of many other epoxy adhesives, is relatively insensitive to mixing ratio or substrate cleaning procedures. Master Bond Polymer Adhesive/Sealant EP21TPND can be applied without sagging or dripping even on vertical surfaces. It produces durable high strength and tough, flexible bonds and seals which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -60°F to 250°F. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive/sealant is an electrical insulator. Color of part A gray, part B amber. Master Bond EP21TPND adhesive/sealant is widely used in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries. EP21TPND and related systems have been successfully used as fuel tank sealants for years! The cured compound fully meets the requirements for polysulfide/epoxy type sealants. It is also available as a flowable liquid of moderate viscosity; EP21TP (viscosity 50,000 cps), or a lower viscosity (5,000 cps) system called EP21TPLV.

硕士邦德高分子胶粘剂EP21TPND是双组份聚硫/环氧基胶粘剂/配方，固化在室温或高温下更迅速，具有100至100混合比例按重量（A / B），密封胶。 它易于开发了超过1000磅在室温下它不像其他许多环氧粘合剂，是相对不敏感，混合比或基板清洗程序粘接强度高。 硕士邦德高分子胶粘剂/密封胶EP21TPND可应用于无下垂或垂直的表面上，甚至滴水。 它产生在-60 ° F极宽的温度范围内长期高强度和坚韧，灵活的债券和海豹是显着的抗热循环和包括水，油和大多数有机溶剂的化学品，到250 ° F。 粘附于金属，玻璃，陶瓷，木材，橡胶硫化和许多塑料是非常好的。 硬化胶粘剂/密封胶是一种绝缘体。 A部分颜色灰色，B部分琥珀。 硕士邦德EP21TPND胶粘剂/密封剂，广泛应用于电子，电气，计算机，建筑，金属加工，家电，汽车，化工等行业。 EP21TPND和相关系统已成功地为油箱密封剂使用多年！ 固化后的复合型完全符合聚硫/环氧型密封胶的要求。 它也可作为中等粘度可流动的液体可用; EP21TP（粘度50000厘泊），或低粘度（5,000 CPS）系统调用EP21TPLV。

Master Bond Polymer Adhesive EP21TPND is a two component polysulfide/epoxy based adhesive/ sealant formulated to cure at room temperature or more rapidly at elevated temperatures, with a 100 to 100 mix ratio (A/B) by weight. It readily develops a high bonding strength of more than 1000 psi at room temperature which unlike that of many other epoxy adhesives, is relatively insensitive to mixing ratio or substrate cleaning procedures. Master Bond Polymer Adhesive/Sealant EP21TPND can be applied without sagging or dripping even on vertical surfaces. It produces durable high strength and tough, flexible bonds and seals which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -60°F to 250°F. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive/sealant is an electrical insulator. Color of part A gray, part B amber. Master Bond EP21TPND adhesive/sealant is widely used in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries. EP21TPND and related systems have been successfully used as fuel tank sealants for years! The cured compound fully meets the requirements for polysulfide/epoxy type sealants. It is also available as a flowable liquid of moderate viscosity; EP21TP (viscosity 50,000 cps), or a lower viscosity (5,000 cps) system called EP21TPLV.

硕士邦德高分子胶粘剂EP21TPND是双组份聚硫/环氧基胶粘剂/配方，固化在室温或高温下更迅速，具有100至100混合比例按重量（A / B），密封胶。 它易于开发了超过1000磅在室温下它不像其他许多环氧粘合剂，是相对不敏感，混合比或基板清洗程序粘接强度高。 硕士邦德高分子胶粘剂/密封胶EP21TPND可应用于无下垂或垂直的表面上，甚至滴水。 它产生在-60 ° F极宽的温度范围内长期高强度和坚韧，灵活的债券和海豹是显着的抗热循环和包括水，油和大多数有机溶剂的化学品，到250 ° F。 粘附于金属，玻璃，陶瓷，木材，橡胶硫化和许多塑料是非常好的。 硬化胶粘剂/密封胶是一种绝缘体。 A部分颜色灰色，B部分琥珀。 硕士邦德EP21TPND胶粘剂/密封剂，广泛应用于电子，电气，计算机，建筑，金属加工，家电，汽车，化工等行业。 EP21TPND和相关系统已成功地为油箱密封剂使用多年！ 固化后的复合型完全符合聚硫/环氧型密封胶的要求。 它也可作为中等粘度可流动的液体可用; EP21TP（粘度50000厘泊），或低粘度（5,000 CPS）系统调用EP21TPLV。

Master Bond Polymer Adhesive EP21TPND is a two component polysulfide/epoxy based adhesive/ sealant formulated to cure at room temperature or more rapidly at elevated temperatures, with a 100 to 100 mix ratio (A/B) by weight. It readily develops a high bonding strength of more than 1000 psi at room temperature which unlike that of many other epoxy adhesives, is relatively insensitive to mixing ratio or substrate cleaning procedures. Master Bond Polymer Adhesive/Sealant EP21TPND can be applied without sagging or dripping even on vertical surfaces. It produces durable high strength and tough, flexible bonds and seals which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -60°F to 250°F. Adhesion to metals, glass, ceramics, wood, vulcanized rubbers and many plastics is excellent. The hardened adhesive/sealant is an electrical insulator. Color of part A gray, part B amber. Master Bond EP21TPND adhesive/sealant is widely used in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries. EP21TPND and related systems have been successfully used as fuel tank sealants for years! The cured compound fully meets the requirements for polysulfide/epoxy type sealants. It is also available as a flowable liquid of moderate viscosity; EP21TP (viscosity 50,000 cps), or a lower viscosity (5,000 cps) system called EP21TPLV.