硕士邦德聚合物系统EP21ARHT – 1是一种双组份环氧酚醛耐用高性能胶粘剂，密封剂和具有突出的耐化学性和非常高的树脂复合涂层的热稳定性。 该EP21ARHT – 1化​​合物配方，在常温下固化迅速，非常善于以方便两到一个非关键的重量比混合高温快。 它提供了耐化学性和热稳定性的程度以及治愈的能力由现有的任何其他室温或加热固化成分无法比拟的速度。 主键EP21ARHT – 1的组成可以成功地抵御，例如，长强无机酸的解决方案和蒸气在高温下长期接触，例如200 ° F以上，从而使之成为粘合剂，密封剂，涂料，衬里为总理候选人化工管道，储罐，洗涤器，化学处理设备等，这显着的酚醛树脂基复合还具有优良的长期耐燃料，油，乙醇，润滑化合物和多种活性有机溶剂。 硕士邦德聚合物系统EP21ARHT – 1是100％反应，不包含​​以最小的收缩，以强硬的热固性塑料任何溶剂或稀释剂和固化。 它易于开发了超过2500 psi到室温金属和非金属基材它不像其他许多环氧树脂化合物，是相对不敏感，混合比和/或基板清洗程序粘接强度高。 硕士邦德聚合物系统EP21ARHT – 1可以应用于无下垂或倾斜或垂直表面淋漓。 它产生非常耐用，高性能，高韧，高强度涂​​层，衬垫和胶粘剂/以优异的酸以及化学品和耐溶剂密封剂是同样显着性在-60 ° F至+400宽的温度范围热循环° F。 粘附于金属，玻璃，陶瓷，水泥，木材，橡胶硫化和许多塑料是非常好的。 热固性塑料的固化尺寸稳定性的确是出色的。 电气绝缘特性和热膨胀系数确实是在要求苛刻的应用使用可取的。 部分颜色一个是黑色的，B部分琥珀。 这环氧树脂化合物被广泛应用于建筑，保养和维修，化工工艺，金属加工设备和电气/电子行业只要耐用，高性能，坚韧粘合剂，密封剂，涂料，以优异的耐酸，化学/溶剂性能，热稳定性衬垫和快速固化是必需的。

Master Bond Polymer System EP21ARHT-1 is a two component epoxy novolac resin compound for durable high performance adhesives, sealants and coatings with outstanding chemical resistance and remarkably high thermal stability. The EP21ARHT-1 compound is formulated to cure quickly at ambient temperatures and very fast at elevated temperatures with a convenient two-to-one non-critical mix ratio by weight. It offers a degree of chemical resistance and thermal stability together with speed of cure capability unmatched by any other currently available room temperature or heat curing composition. The Master Bond EP21ARHT-1 composition can successfully withstand, for example, long term exposure to strong mineral acid solutions and vapors at elevated temperatures e.g. 200°F and above, thus making it a prime candidate for adhesives, sealants, coatings, and liners for chemical piping, storage tanks, scrubbers, chemical processing equipment etc. This remarkable epoxy novolac resin based compound also features excellent long term resistance to fuels, oils, ethanol, lubricating compounds and many active organic solvents. Master Bond Polymer System EP21ARHT-1 is 100% reactive, does not contain any solvents or diluents and cures with minimal shrinkage to a tough thermoset plastic. It readily develops a high bonding strength of more than 2500 psi at room temperature to both metallic and non-metallic substrates which unlike that of many other epoxy resin compounds, is relatively insensitive to mixing ratio and/or substrate cleaning procedures. Master Bond Polymer System EP21ARHT-1 can be applied without sagging or dripping on inclined or vertical surfaces. It produces exceptionally durable, high performance, tough, high strength coatings, liners and adhesive/sealants with outstanding acid as well as chemical and solvent resistance which are likewise remarkably resistant to thermal cycling over the wide temperature range of -60°F to +400°F. Adhesion to metals, glass, ceramics, cements, wood, vulcanized rubbers and many plastics is excellent. Dimensional stability of the cured thermoset plastic is outstanding indeed. The electrical insulating characteristics and thermal expansion coefficients are desirable indeed for use in demanding applications. Color of part A is black, part B amber. This epoxy resin compound is widely used in the construction, maintenance and repair, chemical process, metalworking appliance and electrical/electronic industries wherever durable, high performance, tough adhesives, sealants, coatings and liners with outstanding acid, chemical/solvent resistance, thermal stability and quick cure are required.

硕士邦德聚合物系统EP21ARHT – 1是一种双组份环氧酚醛耐用高性能胶粘剂，密封剂和具有突出的耐化学性和非常高的树脂复合涂层的热稳定性。 该EP21ARHT – 1化​​合物配方，在常温下固化迅速，非常善于以方便两到一个非关键的重量比混合高温快。 它提供了耐化学性和热稳定性的程度以及治愈的能力由现有的任何其他室温或加热固化成分无法比拟的速度。 主键EP21ARHT – 1的组成可以成功地抵御，例如，长强无机酸的解决方案和蒸气在高温下长期接触，例如200 ° F以上，从而使之成为粘合剂，密封剂，涂料，衬里为总理候选人化工管道，储罐，洗涤器，化学处理设备等，这显着的酚醛树脂基复合还具有优良的长期耐燃料，油，乙醇，润滑化合物和多种活性有机溶剂。 硕士邦德聚合物系统EP21ARHT – 1是100％反应，不包含​​以最小的收缩，以强硬的热固性塑料任何溶剂或稀释剂和固化。 它易于开发了超过2500 psi到室温金属和非金属基材它不像其他许多环氧树脂化合物，是相对不敏感，混合比和/或基板清洗程序粘接强度高。 硕士邦德聚合物系统EP21ARHT – 1可以应用于无下垂或倾斜或垂直表面淋漓。 它产生非常耐用，高性能，高韧，高强度涂​​层，衬垫和胶粘剂/以优异的酸以及化学品和耐溶剂密封剂是同样显着性在-60 ° F至+400宽的温度范围热循环° F。 粘附于金属，玻璃，陶瓷，水泥，木材，橡胶硫化和许多塑料是非常好的。 热固性塑料的固化尺寸稳定性的确是出色的。 电气绝缘特性和热膨胀系数确实是在要求苛刻的应用使用可取的。 部分颜色一个是黑色的，B部分琥珀。 这环氧树脂化合物被广泛应用于建筑，保养和维修，化工工艺，金属加工设备和电气/电子行业只要耐用，高性能，坚韧粘合剂，密封剂，涂料，以优异的耐酸，化学/溶剂性能，热稳定性衬垫和快速固化是必需的。

Master Bond Polymer System EP21ARHT-1 is a two component epoxy novolac resin compound for durable high performance adhesives, sealants and coatings with outstanding chemical resistance and remarkably high thermal stability. The EP21ARHT-1 compound is formulated to cure quickly at ambient temperatures and very fast at elevated temperatures with a convenient two-to-one non-critical mix ratio by weight. It offers a degree of chemical resistance and thermal stability together with speed of cure capability unmatched by any other currently available room temperature or heat curing composition. The Master Bond EP21ARHT-1 composition can successfully withstand, for example, long term exposure to strong mineral acid solutions and vapors at elevated temperatures e.g. 200°F and above, thus making it a prime candidate for adhesives, sealants, coatings, and liners for chemical piping, storage tanks, scrubbers, chemical processing equipment etc. This remarkable epoxy novolac resin based compound also features excellent long term resistance to fuels, oils, ethanol, lubricating compounds and many active organic solvents. Master Bond Polymer System EP21ARHT-1 is 100% reactive, does not contain any solvents or diluents and cures with minimal shrinkage to a tough thermoset plastic. It readily develops a high bonding strength of more than 2500 psi at room temperature to both metallic and non-metallic substrates which unlike that of many other epoxy resin compounds, is relatively insensitive to mixing ratio and/or substrate cleaning procedures. Master Bond Polymer System EP21ARHT-1 can be applied without sagging or dripping on inclined or vertical surfaces. It produces exceptionally durable, high performance, tough, high strength coatings, liners and adhesive/sealants with outstanding acid as well as chemical and solvent resistance which are likewise remarkably resistant to thermal cycling over the wide temperature range of -60°F to +400°F. Adhesion to metals, glass, ceramics, cements, wood, vulcanized rubbers and many plastics is excellent. Dimensional stability of the cured thermoset plastic is outstanding indeed. The electrical insulating characteristics and thermal expansion coefficients are desirable indeed for use in demanding applications. Color of part A is black, part B amber. This epoxy resin compound is widely used in the construction, maintenance and repair, chemical process, metalworking appliance and electrical/electronic industries wherever durable, high performance, tough adhesives, sealants, coatings and liners with outstanding acid, chemical/solvent resistance, thermal stability and quick cure are required.

硕士邦德聚合物系统EP21ARHT – 1是一种双组份环氧酚醛耐用高性能胶粘剂，密封剂和具有突出的耐化学性和非常高的树脂复合涂层的热稳定性。 该EP21ARHT – 1化​​合物配方，在常温下固化迅速，非常善于以方便两到一个非关键的重量比混合高温快。 它提供了耐化学性和热稳定性的程度以及治愈的能力由现有的任何其他室温或加热固化成分无法比拟的速度。 主键EP21ARHT – 1的组成可以成功地抵御，例如，长强无机酸的解决方案和蒸气在高温下长期接触，例如200 ° F以上，从而使之成为粘合剂，密封剂，涂料，衬里为总理候选人化工管道，储罐，洗涤器，化学处理设备等，这显着的酚醛树脂基复合还具有优良的长期耐燃料，油，乙醇，润滑化合物和多种活性有机溶剂。 硕士邦德聚合物系统EP21ARHT – 1是100％反应，不包含​​以最小的收缩，以强硬的热固性塑料任何溶剂或稀释剂和固化。 它易于开发了超过2500 psi到室温金属和非金属基材它不像其他许多环氧树脂化合物，是相对不敏感，混合比和/或基板清洗程序粘接强度高。 硕士邦德聚合物系统EP21ARHT – 1可以应用于无下垂或倾斜或垂直表面淋漓。 它产生非常耐用，高性能，高韧，高强度涂​​层，衬垫和胶粘剂/以优异的酸以及化学品和耐溶剂密封剂是同样显着性在-60 ° F至+400宽的温度范围热循环° F。 粘附于金属，玻璃，陶瓷，水泥，木材，橡胶硫化和许多塑料是非常好的。 热固性塑料的固化尺寸稳定性的确是出色的。 电气绝缘特性和热膨胀系数确实是在要求苛刻的应用使用可取的。 部分颜色一个是黑色的，B部分琥珀。 这环氧树脂化合物被广泛应用于建筑，保养和维修，化工工艺，金属加工设备和电气/电子行业只要耐用，高性能，坚韧粘合剂，密封剂，涂料，以优异的耐酸，化学/溶剂性能，热稳定性衬垫和快速固化是必需的。

Master Bond Polymer System EP21ARHT-1 is a two component epoxy novolac resin compound for durable high performance adhesives, sealants and coatings with outstanding chemical resistance and remarkably high thermal stability. The EP21ARHT-1 compound is formulated to cure quickly at ambient temperatures and very fast at elevated temperatures with a convenient two-to-one non-critical mix ratio by weight. It offers a degree of chemical resistance and thermal stability together with speed of cure capability unmatched by any other currently available room temperature or heat curing composition. The Master Bond EP21ARHT-1 composition can successfully withstand, for example, long term exposure to strong mineral acid solutions and vapors at elevated temperatures e.g. 200°F and above, thus making it a prime candidate for adhesives, sealants, coatings, and liners for chemical piping, storage tanks, scrubbers, chemical processing equipment etc. This remarkable epoxy novolac resin based compound also features excellent long term resistance to fuels, oils, ethanol, lubricating compounds and many active organic solvents. Master Bond Polymer System EP21ARHT-1 is 100% reactive, does not contain any solvents or diluents and cures with minimal shrinkage to a tough thermoset plastic. It readily develops a high bonding strength of more than 2500 psi at room temperature to both metallic and non-metallic substrates which unlike that of many other epoxy resin compounds, is relatively insensitive to mixing ratio and/or substrate cleaning procedures. Master Bond Polymer System EP21ARHT-1 can be applied without sagging or dripping on inclined or vertical surfaces. It produces exceptionally durable, high performance, tough, high strength coatings, liners and adhesive/sealants with outstanding acid as well as chemical and solvent resistance which are likewise remarkably resistant to thermal cycling over the wide temperature range of -60°F to +400°F. Adhesion to metals, glass, ceramics, cements, wood, vulcanized rubbers and many plastics is excellent. Dimensional stability of the cured thermoset plastic is outstanding indeed. The electrical insulating characteristics and thermal expansion coefficients are desirable indeed for use in demanding applications. Color of part A is black, part B amber. This epoxy resin compound is widely used in the construction, maintenance and repair, chemical process, metalworking appliance and electrical/electronic industries wherever durable, high performance, tough adhesives, sealants, coatings and liners with outstanding acid, chemical/solvent resistance, thermal stability and quick cure are required.