硕士邦德聚合物系统EP110F6是一种二组分高性能环氧树脂在室温下具有寿命长锅是专为灌封，密封，封装和铸造设计的树脂体系。 它需要高温固化。 固化后的EP110F6是一个“艰难的”以优异的抗热震性和优良的电气绝缘与热循环性能卓越的特性系统。 它坚持好，对金属和其他承印物种类繁多。 固化后EP110F6的物理和电气性能均优于用室温固化以及其他加热固化系统的最系统的。 它抵抗了多种化学品。 该部分的颜色明显，而A是B部分的颜色是琥珀色。 最重要的是，EP110F6传递海军“六角酒吧”测试，MIL I – 16923C，10个循环，-55 ° C至+155 ° C。组成 它被广泛用于高性能应用的电绝缘性能和耐热循环是必需的。 应当注意到，EP110F6典型的固化时间的3-5小时固化在125 ° C和增强的性能特性可以用一个额外的2-3个小时150℃后固化实现组成。

Master Bond Polymer System EP110F6 is a two component high performance epoxy resin system with a long pot life at room temperature which is specifically designed for potting, sealing, encapsulating and casting. It requires an elevated temperature cure. The cured EP110F6 is a “tough” system with outstanding thermal shock resistance and superb thermal cycling properties along with excellent electrical insulation characteristics. It adheres well to metals and a wide variety of other substrates. The physical and electrical properties of the cured EP110F6 are superior to those of most systems with a room temperature cure as well as other heat cured systems. It resists a wide range of chemicals. The color of part A is clear while the color of part B is amber. Most importantly, EP110F6 passes the Navy “Hex Bar” Test, MIL I-16923C, consisting of 10 cycles, -55°C to +155°C. It is widely used in applications were high performance electrical insulation properties and resistance to thermal cycling are required. It should be noted that the typical cure schedule for EP110F6 consists of a 3-5 hour cure at 125°C and that enhanced performance properties can be achieved with an additional 2-3 hour 150°C post cure.

硕士邦德聚合物系统EP110F6是一种二组分高性能环氧树脂在室温下具有寿命长锅是专为灌封，密封，封装和铸造设计的树脂体系。 它需要高温固化。 固化后的EP110F6是一个“艰难的”以优异的抗热震性和优良的电气绝缘与热循环性能卓越的特性系统。 它坚持好，对金属和其他承印物种类繁多。 固化后EP110F6的物理和电气性能均优于用室温固化以及其他加热固化系统的最系统的。 它抵抗了多种化学品。 该部分的颜色明显，而A是B部分的颜色是琥珀色。 最重要的是，EP110F6传递海军“六角酒吧”测试，MIL I – 16923C，10个循环，-55 ° C至+155 ° C。组成 它被广泛用于高性能应用的电绝缘性能和耐热循环是必需的。 应当注意到，EP110F6典型的固化时间的3-5小时固化在125 ° C和增强的性能特性可以用一个额外的2-3个小时150℃后固化实现组成。

Master Bond Polymer System EP110F6 is a two component high performance epoxy resin system with a long pot life at room temperature which is specifically designed for potting, sealing, encapsulating and casting. It requires an elevated temperature cure. The cured EP110F6 is a “tough” system with outstanding thermal shock resistance and superb thermal cycling properties along with excellent electrical insulation characteristics. It adheres well to metals and a wide variety of other substrates. The physical and electrical properties of the cured EP110F6 are superior to those of most systems with a room temperature cure as well as other heat cured systems. It resists a wide range of chemicals. The color of part A is clear while the color of part B is amber. Most importantly, EP110F6 passes the Navy “Hex Bar” Test, MIL I-16923C, consisting of 10 cycles, -55°C to +155°C. It is widely used in applications were high performance electrical insulation properties and resistance to thermal cycling are required. It should be noted that the typical cure schedule for EP110F6 consists of a 3-5 hour cure at 125°C and that enhanced performance properties can be achieved with an additional 2-3 hour 150°C post cure.

硕士邦德聚合物系统EP110F6是一种二组分高性能环氧树脂在室温下具有寿命长锅是专为灌封，密封，封装和铸造设计的树脂体系。 它需要高温固化。 固化后的EP110F6是一个“艰难的”以优异的抗热震性和优良的电气绝缘与热循环性能卓越的特性系统。 它坚持好，对金属和其他承印物种类繁多。 固化后EP110F6的物理和电气性能均优于用室温固化以及其他加热固化系统的最系统的。 它抵抗了多种化学品。 该部分的颜色明显，而A是B部分的颜色是琥珀色。 最重要的是，EP110F6传递海军“六角酒吧”测试，MIL I – 16923C，10个循环，-55 ° C至+155 ° C。组成 它被广泛用于高性能应用的电绝缘性能和耐热循环是必需的。 应当注意到，EP110F6典型的固化时间的3-5小时固化在125 ° C和增强的性能特性可以用一个额外的2-3个小时150℃后固化实现组成。

Master Bond Polymer System EP110F6 is a two component high performance epoxy resin system with a long pot life at room temperature which is specifically designed for potting, sealing, encapsulating and casting. It requires an elevated temperature cure. The cured EP110F6 is a “tough” system with outstanding thermal shock resistance and superb thermal cycling properties along with excellent electrical insulation characteristics. It adheres well to metals and a wide variety of other substrates. The physical and electrical properties of the cured EP110F6 are superior to those of most systems with a room temperature cure as well as other heat cured systems. It resists a wide range of chemicals. The color of part A is clear while the color of part B is amber. Most importantly, EP110F6 passes the Navy “Hex Bar” Test, MIL I-16923C, consisting of 10 cycles, -55°C to +155°C. It is widely used in applications were high performance electrical insulation properties and resistance to thermal cycling are required. It should be noted that the typical cure schedule for EP110F6 consists of a 3-5 hour cure at 125°C and that enhanced performance properties can be achieved with an additional 2-3 hour 150°C post cure.