硕士邦德的聚合物系统EP120SP是一个高性能耐凝胶大衣ancl纤维缠绕结构的防护涂料为双组分环氧/酸酐体系。 它是100％反应，不包含​​任何溶剂或稀释剂。 硕士邦德聚合物系统EP120SP，可以很容易地胶凝在低温度为100-120 ° C。 完全固化，温度在125 ° C至150 ° C范围内。 固化后的聚合物具有优良的物理强度性能，并有热distortlon温度约137 ° C。 硕士邦德EP120SP是提供在每两个有一个最低的六（6）个月稳定的液体成分的形式储存在温度约为25 ± 5 ° C。

Master Bond Polymer System EP120SP is a two-component epoxy/anhydride system for high performance resistant gel coats ancl protective coatings for filament wound structures. It is, 100% reactive and does not contain any solvents or diluents. Master Bond Polymer System EP120SP can be readily gelled at temperatures as low as 100-120°C. Full cure is obtained at temperatures in the 125°C to 150°C range. The cured polymer features superior physical strength properties and has a heat distortlon temperature of around 137°C. Master Bond EP120SP is supplied in the form of two liquid components each having a minimum stability of six (6) months when stored at temperatures of around 25±5°C.

硕士邦德的聚合物系统EP120SP是一个高性能耐凝胶大衣ancl纤维缠绕结构的防护涂料为双组分环氧/酸酐体系。 它是100％反应，不包含​​任何溶剂或稀释剂。 硕士邦德聚合物系统EP120SP，可以很容易地胶凝在低温度为100-120 ° C。 完全固化，温度在125 ° C至150 ° C范围内。 固化后的聚合物具有优良的物理强度性能，并有热distortlon温度约137 ° C。 硕士邦德EP120SP是提供在每两个有一个最低的六（6）个月稳定的液体成分的形式储存在温度约为25 ± 5 ° C。

Master Bond Polymer System EP120SP is a two-component epoxy/anhydride system for high performance resistant gel coats ancl protective coatings for filament wound structures. It is, 100% reactive and does not contain any solvents or diluents. Master Bond Polymer System EP120SP can be readily gelled at temperatures as low as 100-120°C. Full cure is obtained at temperatures in the 125°C to 150°C range. The cured polymer features superior physical strength properties and has a heat distortlon temperature of around 137°C. Master Bond EP120SP is supplied in the form of two liquid components each having a minimum stability of six (6) months when stored at temperatures of around 25±5°C.

硕士邦德的聚合物系统EP120SP是一个高性能耐凝胶大衣ancl纤维缠绕结构的防护涂料为双组分环氧/酸酐体系。 它是100％反应，不包含​​任何溶剂或稀释剂。 硕士邦德聚合物系统EP120SP，可以很容易地胶凝在低温度为100-120 ° C。 完全固化，温度在125 ° C至150 ° C范围内。 固化后的聚合物具有优良的物理强度性能，并有热distortlon温度约137 ° C。 硕士邦德EP120SP是提供在每两个有一个最低的六（6）个月稳定的液体成分的形式储存在温度约为25 ± 5 ° C。

Master Bond Polymer System EP120SP is a two-component epoxy/anhydride system for high performance resistant gel coats ancl protective coatings for filament wound structures. It is, 100% reactive and does not contain any solvents or diluents. Master Bond Polymer System EP120SP can be readily gelled at temperatures as low as 100-120°C. Full cure is obtained at temperatures in the 125°C to 150°C range. The cured polymer features superior physical strength properties and has a heat distortlon temperature of around 137°C. Master Bond EP120SP is supplied in the form of two liquid components each having a minimum stability of six (6) months when stored at temperatures of around 25±5°C.