硕士邦德UV10DCTK是一个新的组成部分紫外线和/或热固化改性环氧粘接性能高，涂层和表面贴装应用树脂体系。 这是一个具有优良的长期在光线和/或热的情况下存储特性的环境温度下流动性粘贴。 当暴露在紫外线光或热，这种化合物很容易治愈源强耐化学腐蚀的债券和涂料。 固化后的UV10DCTK化合物可用于在宽温度范围为-60 ° F至300 ° F。 对于UV固化，最大吸收被发现在300-360纳米范围内。 该硕士邦德UV10LVTK化合物在烤箱在220-250℃下约20分钟F双重固化能力。 该硕士邦德UV10DCTK双重固化能力大大增强UV固化技术通过扩展其适用于光学组件包括两个不透明和透明的组件工具。 它特别适合于表面安装应用程序，其中一个组件可以被“固定”的紫外线，然后将完全由热粘结。 主键UV10DCTK氧树脂体系不抑制，不要求对紫外线或热固化或惰性气氛。 与大多数其他UV固化系统的UV10DCTK化合物可以被治愈的切片厚度范围可达1 / 4“等等。龙保税组装和涂料的耐久性非常好，即使暴露在包括热和潮湿的不利环境条​​件，化学品等展品硕士邦德UV10DCTK高物理强度和优越的耐化学性，包括酸，碱和盐以及最常用的溶剂，如有机化工无机化工原料，高强度债券与金属，陶瓷，玻璃，造纸，许多获得塑料和弹性体的复合是100％反应，不含有任何溶剂或稀释剂。固化收缩影响是最小的。硕士邦德UV10DCTK优越的性能配置，是由于其独特的化学成分，其中包括一个非常有效的紫外线固化剂和卓越热固化催化剂。快速紫外光固化机制是通过接触市售200瓦特/线性英寸中压水银灯或类似的设备，紫外线灯等商业治愈。触发可影响在相当短的时间段，如1分钟在环境温度低，当低强度紫外线灯是采用较长的固化时间是必要的。正如烘箱固化，可在220-250 ° F取得了大约20分钟。存储的法师债券UV10DCTK复合稳定超过三（3）月下未开封的容器常规储存条件。

Master Bond UV10DCTK is a new one component UV and/or heat curable modified epoxy resin system for high performance bonding, coating and surface mount applications. It is a flowable paste at ambient temperatures with excellent long term storage characteristics in the absence of light and/or heat. When exposed to a source of UV light or heat, this compound cures readily to strong chemically resistant bonds and coatings. The cured UV10DCTK compound can be used over the wide temperature range of -60°F to 300°F. For UV curing, the maximum absorption is found in the 300-360 nanometer range. The dual cure capability of the Master Bond UV10LVTK compound in an oven at 220-250°F for approximately 20 minutes. The dual cure capability of the Master Bond UV10DCTK greatly enhances the utility of UV curing technology by extending its applicability to assemblies comprising both optically opaque and transparent components. It is particularly well suited for surface mount application where a component can be “fixed” by the UV light and then be completely bonded by the heat. The Master Bond UV10DCTK resin system is not oxygen inhibited and does not require an inert atmosphere for either UV or thermal cures. Unlike most other UV curing systems the UV10DCTK compound can be cured in a wide range of section thickness up to 1/4″ and more. Long term durability of bonded assemblies and coatings is excellent even when exposed to adverse environmental conditions including heat and moisture, chemicals, etc. Master Bond UV10DCTK exhibits high physical strengths and superior chemical resistance to inorganic chemicals including acids, bases and salts as well as organic chemicals such as most common solvents. High strength bonds are obtained with metals, ceramics, glass, paper, many plastics and elastomers. The compound is 100% reactive and does not contain any solvents or diluents. Cures are effected with minimal shrinkage. Master Bond UV10DCTK superior performance profile is due to its unique chemical composition which includes an exceptionally effective UV curing agent and a superior thermally curing catalyst. The fast UV curing mechanism is triggered by exposure to commercially available 200 watt/linear inch medium pressure mercury vapor lamps or similar equipment. With such commercial UV lamps cures can be effected in remarkably short time periods, e.g., 1 minute or less at ambient temperatures. When lower intensity UV lamps are employed somewhat longer curing times are necessary. As noted oven cures can be achieved at 220-250°F in approximately 20 minutes. Storage stability of the Master Bond UV10DCTK compound exceeds three (3) months under conventional storage conditions in unopened containers.

硕士邦德UV10DCTK是一个新的组成部分紫外线和/或热固化改性环氧粘接性能高，涂层和表面贴装应用树脂体系。 这是一个具有优良的长期在光线和/或热的情况下存储特性的环境温度下流动性粘贴。 当暴露在紫外线光或热，这种化合物很容易治愈源强耐化学腐蚀的债券和涂料。 固化后的UV10DCTK化合物可用于在宽温度范围为-60 ° F至300 ° F。 对于UV固化，最大吸收被发现在300-360纳米范围内。 该硕士邦德UV10LVTK化合物在烤箱在220-250℃下约20分钟F双重固化能力。 该硕士邦德UV10DCTK双重固化能力大大增强UV固化技术通过扩展其适用于光学组件包括两个不透明和透明的组件工具。 它特别适合于表面安装应用程序，其中一个组件可以被“固定”的紫外线，然后将完全由热粘结。 主键UV10DCTK氧树脂体系不抑制，不要求对紫外线或热固化或惰性气氛。 与大多数其他UV固化系统的UV10DCTK化合物可以被治愈的切片厚度范围可达1 / 4“等等。龙保税组装和涂料的耐久性非常好，即使暴露在包括热和潮湿的不利环境条​​件，化学品等展品硕士邦德UV10DCTK高物理强度和优越的耐化学性，包括酸，碱和盐以及最常用的溶剂，如有机化工无机化工原料，高强度债券与金属，陶瓷，玻璃，造纸，许多获得塑料和弹性体的复合是100％反应，不含有任何溶剂或稀释剂。固化收缩影响是最小的。硕士邦德UV10DCTK优越的性能配置，是由于其独特的化学成分，其中包括一个非常有效的紫外线固化剂和卓越热固化催化剂。快速紫外光固化机制是通过接触市售200瓦特/线性英寸中压水银灯或类似的设备，紫外线灯等商业治愈。触发可影响在相当短的时间段，如1分钟在环境温度低，当低强度紫外线灯是采用较长的固化时间是必要的。正如烘箱固化，可在220-250 ° F取得了大约20分钟。存储的法师债券UV10DCTK复合稳定超过三（3）月下未开封的容器常规储存条件。

Master Bond UV10DCTK is a new one component UV and/or heat curable modified epoxy resin system for high performance bonding, coating and surface mount applications. It is a flowable paste at ambient temperatures with excellent long term storage characteristics in the absence of light and/or heat. When exposed to a source of UV light or heat, this compound cures readily to strong chemically resistant bonds and coatings. The cured UV10DCTK compound can be used over the wide temperature range of -60°F to 300°F. For UV curing, the maximum absorption is found in the 300-360 nanometer range. The dual cure capability of the Master Bond UV10LVTK compound in an oven at 220-250°F for approximately 20 minutes. The dual cure capability of the Master Bond UV10DCTK greatly enhances the utility of UV curing technology by extending its applicability to assemblies comprising both optically opaque and transparent components. It is particularly well suited for surface mount application where a component can be “fixed” by the UV light and then be completely bonded by the heat. The Master Bond UV10DCTK resin system is not oxygen inhibited and does not require an inert atmosphere for either UV or thermal cures. Unlike most other UV curing systems the UV10DCTK compound can be cured in a wide range of section thickness up to 1/4″ and more. Long term durability of bonded assemblies and coatings is excellent even when exposed to adverse environmental conditions including heat and moisture, chemicals, etc. Master Bond UV10DCTK exhibits high physical strengths and superior chemical resistance to inorganic chemicals including acids, bases and salts as well as organic chemicals such as most common solvents. High strength bonds are obtained with metals, ceramics, glass, paper, many plastics and elastomers. The compound is 100% reactive and does not contain any solvents or diluents. Cures are effected with minimal shrinkage. Master Bond UV10DCTK superior performance profile is due to its unique chemical composition which includes an exceptionally effective UV curing agent and a superior thermally curing catalyst. The fast UV curing mechanism is triggered by exposure to commercially available 200 watt/linear inch medium pressure mercury vapor lamps or similar equipment. With such commercial UV lamps cures can be effected in remarkably short time periods, e.g., 1 minute or less at ambient temperatures. When lower intensity UV lamps are employed somewhat longer curing times are necessary. As noted oven cures can be achieved at 220-250°F in approximately 20 minutes. Storage stability of the Master Bond UV10DCTK compound exceeds three (3) months under conventional storage conditions in unopened containers.

硕士邦德UV10DCTK是一个新的组成部分紫外线和/或热固化改性环氧粘接性能高，涂层和表面贴装应用树脂体系。 这是一个具有优良的长期在光线和/或热的情况下存储特性的环境温度下流动性粘贴。 当暴露在紫外线光或热，这种化合物很容易治愈源强耐化学腐蚀的债券和涂料。 固化后的UV10DCTK化合物可用于在宽温度范围为-60 ° F至300 ° F。 对于UV固化，最大吸收被发现在300-360纳米范围内。 该硕士邦德UV10LVTK化合物在烤箱在220-250℃下约20分钟F双重固化能力。 该硕士邦德UV10DCTK双重固化能力大大增强UV固化技术通过扩展其适用于光学组件包括两个不透明和透明的组件工具。 它特别适合于表面安装应用程序，其中一个组件可以被“固定”的紫外线，然后将完全由热粘结。 主键UV10DCTK氧树脂体系不抑制，不要求对紫外线或热固化或惰性气氛。 与大多数其他UV固化系统的UV10DCTK化合物可以被治愈的切片厚度范围可达1 / 4“等等。龙保税组装和涂料的耐久性非常好，即使暴露在包括热和潮湿的不利环境条​​件，化学品等展品硕士邦德UV10DCTK高物理强度和优越的耐化学性，包括酸，碱和盐以及最常用的溶剂，如有机化工无机化工原料，高强度债券与金属，陶瓷，玻璃，造纸，许多获得塑料和弹性体的复合是100％反应，不含有任何溶剂或稀释剂。固化收缩影响是最小的。硕士邦德UV10DCTK优越的性能配置，是由于其独特的化学成分，其中包括一个非常有效的紫外线固化剂和卓越热固化催化剂。快速紫外光固化机制是通过接触市售200瓦特/线性英寸中压水银灯或类似的设备，紫外线灯等商业治愈。触发可影响在相当短的时间段，如1分钟在环境温度低，当低强度紫外线灯是采用较长的固化时间是必要的。正如烘箱固化，可在220-250 ° F取得了大约20分钟。存储的法师债券UV10DCTK复合稳定超过三（3）月下未开封的容器常规储存条件。

Master Bond UV10DCTK is a new one component UV and/or heat curable modified epoxy resin system for high performance bonding, coating and surface mount applications. It is a flowable paste at ambient temperatures with excellent long term storage characteristics in the absence of light and/or heat. When exposed to a source of UV light or heat, this compound cures readily to strong chemically resistant bonds and coatings. The cured UV10DCTK compound can be used over the wide temperature range of -60°F to 300°F. For UV curing, the maximum absorption is found in the 300-360 nanometer range. The dual cure capability of the Master Bond UV10LVTK compound in an oven at 220-250°F for approximately 20 minutes. The dual cure capability of the Master Bond UV10DCTK greatly enhances the utility of UV curing technology by extending its applicability to assemblies comprising both optically opaque and transparent components. It is particularly well suited for surface mount application where a component can be “fixed” by the UV light and then be completely bonded by the heat. The Master Bond UV10DCTK resin system is not oxygen inhibited and does not require an inert atmosphere for either UV or thermal cures. Unlike most other UV curing systems the UV10DCTK compound can be cured in a wide range of section thickness up to 1/4″ and more. Long term durability of bonded assemblies and coatings is excellent even when exposed to adverse environmental conditions including heat and moisture, chemicals, etc. Master Bond UV10DCTK exhibits high physical strengths and superior chemical resistance to inorganic chemicals including acids, bases and salts as well as organic chemicals such as most common solvents. High strength bonds are obtained with metals, ceramics, glass, paper, many plastics and elastomers. The compound is 100% reactive and does not contain any solvents or diluents. Cures are effected with minimal shrinkage. Master Bond UV10DCTK superior performance profile is due to its unique chemical composition which includes an exceptionally effective UV curing agent and a superior thermally curing catalyst. The fast UV curing mechanism is triggered by exposure to commercially available 200 watt/linear inch medium pressure mercury vapor lamps or similar equipment. With such commercial UV lamps cures can be effected in remarkably short time periods, e.g., 1 minute or less at ambient temperatures. When lower intensity UV lamps are employed somewhat longer curing times are necessary. As noted oven cures can be achieved at 220-250°F in approximately 20 minutes. Storage stability of the Master Bond UV10DCTK compound exceeds three (3) months under conventional storage conditions in unopened containers.