硕士邦德聚合物系统UV19是一种新开发的UV固化，低粘度光专为高清晰的复合层压性能设计，密封，粘接和涂层。 这个了不起的丙烯酸基聚合物成分可以有效地取代传统的加热和/或溶剂型覆膜粘接胶粘剂和密封清晰电影，片等，以各种其他的电影，纸张和相当高的速度和更低的成本箔基板。 该UV19层压复合应用，并可以在高达80-100英尺/与市售的紫外线灯分钟的高线速度治愈。 最小胶层的001“/ 003”厚度建议。 粘合剂通常是应用到透明薄膜上，然后通过清晰的电影紫外线照射后的第二基板冻坏。 该UV19尚未治愈的抑制空气。 硕士邦德UV19以及在治疗范围内的20/50mw/cm ² @ 10/15秒约365纳米。 主键聚合物系统UV19是一个光学透明，流动的液体，用了不到300cps粘度测量75 ° F。 它是100％反应性和固化过程中不排放任何挥发性物质。 紫外光固化材料的特点是在800 psi和超过80％，伸长率超过令人印象深刻的拉伸强度。 它提供了优异的附着力到承印物范围广，特别适合用于复合应用，粘接，密封与差异很大，如灵活的软塑料薄膜，包括聚酯薄膜，金属箔，甚至眼镜更刚性材料的热膨胀系数基板。 硕士邦德聚合物系统UV19是一个很好的电气绝缘体。 其他性能优越的性能，包括在固化过程中收缩率低，耐冲击强度，优异的耐热循环，机械振动和冲击，以及广泛的服务为-60 ° F至+ 250 ° F.温度范围 硕士邦德聚合物系统UV19也有很满意的长水和其他腐蚀性化学物质长期性。 表1汇总了这个独特的UV固化胶粘剂复合相关属性

Master Bond Polymer System UV19 is a newly developed UV curable, low viscosity optically clear compound specifically designed for high performance laminating, sealing, bonding and coating. This remarkable acrylic based polymer composition can effectively replace conventional heat and/or solvent based laminating adhesives for bonding and sealing clear films, sheets etc to various other films, paper and foil substrates at substantially higher speeds and lower cost. The UV19 laminating compound can be applied and cured at line speeds as high as 80-100 ft/minute with commercially available UV lamps. Minimum bondline thicknesses of 001″/003″ are recommended. The adhesive is typically applied to the clear film and then nipped onto the second substrate followed by UV irradiation through the clear film. The UV19 cure is not inhibited by air. Master Bond UV19 cures well in the range of 20/50mw/cm² @ 365 nm in approximately 10/15 seconds. The Master Bond Polymer System UV19 is an optically clear, mobile liquid, with a viscosity of less than 300cps measured at 75°F. It is 100% reactive and does not emit any volatiles during cure. The UV cured material features an impressive tensile strength in excess of 800 psi and an elongation of more than 80%. It offers excellent adhesion to a wide range of substrates and is particularly suited for application for lamination, bonding and sealing to substrates with widely different thermal expansion coefficients such as flexible soft plastic films to more rigid materials including polyester films, metal foils and even glasses. Master Bond Polymer System UV19 is a very good electrical insulator. Other advantageous performance properties include low shrinkage during cure, high impact strength, superior resistance to thermal cycling, mechanical vibration and shock as well as a wide service temperature range of -60°F to + 250°F. Master Bond Polymer System UV19 also has very satisfactory long term resistance to water and other aggressive chemicals. Table #1 below summarizes pertinent properties of this unique UV curable adhesive compound

硕士邦德聚合物系统UV19是一种新开发的UV固化，低粘度光专为高清晰的复合层压性能设计，密封，粘接和涂层。 这个了不起的丙烯酸基聚合物成分可以有效地取代传统的加热和/或溶剂型覆膜粘接胶粘剂和密封清晰电影，片等，以各种其他的电影，纸张和相当高的速度和更低的成本箔基板。 该UV19层压复合应用，并可以在高达80-100英尺/与市售的紫外线灯分钟的高线速度治愈。 最小胶层的001“/ 003”厚度建议。 粘合剂通常是应用到透明薄膜上，然后通过清晰的电影紫外线照射后的第二基板冻坏。 该UV19尚未治愈的抑制空气。 硕士邦德UV19以及在治疗范围内的20/50mw/cm ² @ 10/15秒约365纳米。 主键聚合物系统UV19是一个光学透明，流动的液体，用了不到300cps粘度测量75 ° F。 它是100％反应性和固化过程中不排放任何挥发性物质。 紫外光固化材料的特点是在800 psi和超过80％，伸长率超过令人印象深刻的拉伸强度。 它提供了优异的附着力到承印物范围广，特别适合用于复合应用，粘接，密封与差异很大，如灵活的软塑料薄膜，包括聚酯薄膜，金属箔，甚至眼镜更刚性材料的热膨胀系数基板。 硕士邦德聚合物系统UV19是一个很好的电气绝缘体。 其他性能优越的性能，包括在固化过程中收缩率低，耐冲击强度，优异的耐热循环，机械振动和冲击，以及广泛的服务为-60 ° F至+ 250 ° F.温度范围 硕士邦德聚合物系统UV19也有很满意的长水和其他腐蚀性化学物质长期性。 表1汇总了这个独特的UV固化胶粘剂复合相关属性

Master Bond Polymer System UV19 is a newly developed UV curable, low viscosity optically clear compound specifically designed for high performance laminating, sealing, bonding and coating. This remarkable acrylic based polymer composition can effectively replace conventional heat and/or solvent based laminating adhesives for bonding and sealing clear films, sheets etc to various other films, paper and foil substrates at substantially higher speeds and lower cost. The UV19 laminating compound can be applied and cured at line speeds as high as 80-100 ft/minute with commercially available UV lamps. Minimum bondline thicknesses of 001″/003″ are recommended. The adhesive is typically applied to the clear film and then nipped onto the second substrate followed by UV irradiation through the clear film. The UV19 cure is not inhibited by air. Master Bond UV19 cures well in the range of 20/50mw/cm² @ 365 nm in approximately 10/15 seconds. The Master Bond Polymer System UV19 is an optically clear, mobile liquid, with a viscosity of less than 300cps measured at 75°F. It is 100% reactive and does not emit any volatiles during cure. The UV cured material features an impressive tensile strength in excess of 800 psi and an elongation of more than 80%. It offers excellent adhesion to a wide range of substrates and is particularly suited for application for lamination, bonding and sealing to substrates with widely different thermal expansion coefficients such as flexible soft plastic films to more rigid materials including polyester films, metal foils and even glasses. Master Bond Polymer System UV19 is a very good electrical insulator. Other advantageous performance properties include low shrinkage during cure, high impact strength, superior resistance to thermal cycling, mechanical vibration and shock as well as a wide service temperature range of -60°F to + 250°F. Master Bond Polymer System UV19 also has very satisfactory long term resistance to water and other aggressive chemicals. Table #1 below summarizes pertinent properties of this unique UV curable adhesive compound

硕士邦德聚合物系统UV19是一种新开发的UV固化，低粘度光专为高清晰的复合层压性能设计，密封，粘接和涂层。 这个了不起的丙烯酸基聚合物成分可以有效地取代传统的加热和/或溶剂型覆膜粘接胶粘剂和密封清晰电影，片等，以各种其他的电影，纸张和相当高的速度和更低的成本箔基板。 该UV19层压复合应用，并可以在高达80-100英尺/与市售的紫外线灯分钟的高线速度治愈。 最小胶层的001“/ 003”厚度建议。 粘合剂通常是应用到透明薄膜上，然后通过清晰的电影紫外线照射后的第二基板冻坏。 该UV19尚未治愈的抑制空气。 硕士邦德UV19以及在治疗范围内的20/50mw/cm ² @ 10/15秒约365纳米。 主键聚合物系统UV19是一个光学透明，流动的液体，用了不到300cps粘度测量75 ° F。 它是100％反应性和固化过程中不排放任何挥发性物质。 紫外光固化材料的特点是在800 psi和超过80％，伸长率超过令人印象深刻的拉伸强度。 它提供了优异的附着力到承印物范围广，特别适合用于复合应用，粘接，密封与差异很大，如灵活的软塑料薄膜，包括聚酯薄膜，金属箔，甚至眼镜更刚性材料的热膨胀系数基板。 硕士邦德聚合物系统UV19是一个很好的电气绝缘体。 其他性能优越的性能，包括在固化过程中收缩率低，耐冲击强度，优异的耐热循环，机械振动和冲击，以及广泛的服务为-60 ° F至+ 250 ° F.温度范围 硕士邦德聚合物系统UV19也有很满意的长水和其他腐蚀性化学物质长期性。 表1汇总了这个独特的UV固化胶粘剂复合相关属性

Master Bond Polymer System UV19 is a newly developed UV curable, low viscosity optically clear compound specifically designed for high performance laminating, sealing, bonding and coating. This remarkable acrylic based polymer composition can effectively replace conventional heat and/or solvent based laminating adhesives for bonding and sealing clear films, sheets etc to various other films, paper and foil substrates at substantially higher speeds and lower cost. The UV19 laminating compound can be applied and cured at line speeds as high as 80-100 ft/minute with commercially available UV lamps. Minimum bondline thicknesses of 001″/003″ are recommended. The adhesive is typically applied to the clear film and then nipped onto the second substrate followed by UV irradiation through the clear film. The UV19 cure is not inhibited by air. Master Bond UV19 cures well in the range of 20/50mw/cm² @ 365 nm in approximately 10/15 seconds. The Master Bond Polymer System UV19 is an optically clear, mobile liquid, with a viscosity of less than 300cps measured at 75°F. It is 100% reactive and does not emit any volatiles during cure. The UV cured material features an impressive tensile strength in excess of 800 psi and an elongation of more than 80%. It offers excellent adhesion to a wide range of substrates and is particularly suited for application for lamination, bonding and sealing to substrates with widely different thermal expansion coefficients such as flexible soft plastic films to more rigid materials including polyester films, metal foils and even glasses. Master Bond Polymer System UV19 is a very good electrical insulator. Other advantageous performance properties include low shrinkage during cure, high impact strength, superior resistance to thermal cycling, mechanical vibration and shock as well as a wide service temperature range of -60°F to + 250°F. Master Bond Polymer System UV19 also has very satisfactory long term resistance to water and other aggressive chemicals. Table #1 below summarizes pertinent properties of this unique UV curable adhesive compound