硕士邦德UV18MED是一个新的组件，高强度紫外线以高超的耐化学性及涂料，密封和粘接固化系统的灵活性。 这是一个100％反应，在常温下不含有任何溶剂或其他挥发性物质流动的液体。 当暴露在紫外线光源，硕士邦德UV18MED固化后形成具有优良的电绝缘性能持久，强大，灵活和高耐化学性的系统。 最快得到治愈与在250-365纳米波长的发光光源。 治愈后的收缩率大大低于传统的紫外线系统少。 固化后的涂料和胶粘剂/密封剂可用于在极宽的温度范围-80 ° F至250 ° F。 与许多其他商用UV固化产品，硕士邦德UV18MED没有​​氧气抑制和展品甚至在空气中存在a刻意快速治愈率。 性能优越的UV18MED轮廓是由于其独特的疏水性聚合物骨架结构，其特殊的自由基固化的机制。 硕士邦德聚合物系统UV18MED具有优良的耐化学性，水，异丙醇，乙醇，丙酮，丁酮等，以及高达20％硫酸，20％的氢氧化钠和许多其他有腐蚀性的溶剂。 相对于其他紫外光固化系统的水蒸汽渗透性也非常好。 硕士邦德UV18MED可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV18MED形式坚韧，耐用的债券和密封件。 它坚持了包括玻璃，金属和塑料子状态广泛。 它的冲击强度优良，加德纳影响测量超过320英寸磅典型UV18MED涂料性能列于表1。 储存硕士邦德UV18MED稳定为6个月未开封下的正常储存条件。

Master Bond UV18MED is a new one component, high strength UV curable system with superb chemical resistance & flexibility for coating, sealing and bonding. It is a 100% reactive, mobile liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV18MED cures to form a durable, strong, flexible and highly chemically resistant system with excellent electrical insulation properties. Fastest cures are obtained with light sources emitting at a wave length of 250-365 nm. Shrinkage upon cure is substantially less than that of conventional UV systems. The cured coatings and adhesive/sealants can be used over the exceptionally wide temperature range of -80°F to 250°F. Unlike many other commercially available UV curable products, Master Bond UV18MED is not oxygen inhibited and exhibits a desirably fast cure rate even in the presence of air. The superior performance profile of UV18MED is due to its unique hydrophobic polymer backbone structure and its special free radical cure mechanism. Master Bond Polymer System UV18MED features excellent chemical resistance to water, isopropyl alcohol, ethanol, acetone, MEK, etc. as well as up to 20% sulfuric acid, 20% sodium hydroxide and many other aggressive solvents. Compared to other UV curable systems water vapor permeability is also excellent. Master Bond UV18MED can be cured in very short time periods, e.g. 1 minute or less, with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV18MED forms tough, durable bonds and seals. It adheres to a wide range of substates including glass, metals and plastics. The impact strength is excellent, gardner impact measurements exceed 320 inch lb. Properties of typical UV18MED coatings are summarized in table #1. Storage stability of Master Bond UV18MED is 6 months under the usual storage conditions in unopened containers.

硕士邦德UV18MED是一个新的组件，高强度紫外线以高超的耐化学性及涂料，密封和粘接固化系统的灵活性。 这是一个100％反应，在常温下不含有任何溶剂或其他挥发性物质流动的液体。 当暴露在紫外线光源，硕士邦德UV18MED固化后形成具有优良的电绝缘性能持久，强大，灵活和高耐化学性的系统。 最快得到治愈与在250-365纳米波长的发光光源。 治愈后的收缩率大大低于传统的紫外线系统少。 固化后的涂料和胶粘剂/密封剂可用于在极宽的温度范围-80 ° F至250 ° F。 与许多其他商用UV固化产品，硕士邦德UV18MED没有​​氧气抑制和展品甚至在空气中存在a刻意快速治愈率。 性能优越的UV18MED轮廓是由于其独特的疏水性聚合物骨架结构，其特殊的自由基固化的机制。 硕士邦德聚合物系统UV18MED具有优良的耐化学性，水，异丙醇，乙醇，丙酮，丁酮等，以及高达20％硫酸，20％的氢氧化钠和许多其他有腐蚀性的溶剂。 相对于其他紫外光固化系统的水蒸汽渗透性也非常好。 硕士邦德UV18MED可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV18MED形式坚韧，耐用的债券和密封件。 它坚持了包括玻璃，金属和塑料子状态广泛。 它的冲击强度优良，加德纳影响测量超过320英寸磅典型UV18MED涂料性能列于表1。 储存硕士邦德UV18MED稳定为6个月未开封下的正常储存条件。

Master Bond UV18MED is a new one component, high strength UV curable system with superb chemical resistance & flexibility for coating, sealing and bonding. It is a 100% reactive, mobile liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV18MED cures to form a durable, strong, flexible and highly chemically resistant system with excellent electrical insulation properties. Fastest cures are obtained with light sources emitting at a wave length of 250-365 nm. Shrinkage upon cure is substantially less than that of conventional UV systems. The cured coatings and adhesive/sealants can be used over the exceptionally wide temperature range of -80°F to 250°F. Unlike many other commercially available UV curable products, Master Bond UV18MED is not oxygen inhibited and exhibits a desirably fast cure rate even in the presence of air. The superior performance profile of UV18MED is due to its unique hydrophobic polymer backbone structure and its special free radical cure mechanism. Master Bond Polymer System UV18MED features excellent chemical resistance to water, isopropyl alcohol, ethanol, acetone, MEK, etc. as well as up to 20% sulfuric acid, 20% sodium hydroxide and many other aggressive solvents. Compared to other UV curable systems water vapor permeability is also excellent. Master Bond UV18MED can be cured in very short time periods, e.g. 1 minute or less, with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV18MED forms tough, durable bonds and seals. It adheres to a wide range of substates including glass, metals and plastics. The impact strength is excellent, gardner impact measurements exceed 320 inch lb. Properties of typical UV18MED coatings are summarized in table #1. Storage stability of Master Bond UV18MED is 6 months under the usual storage conditions in unopened containers.

硕士邦德UV18MED是一个新的组件，高强度紫外线以高超的耐化学性及涂料，密封和粘接固化系统的灵活性。 这是一个100％反应，在常温下不含有任何溶剂或其他挥发性物质流动的液体。 当暴露在紫外线光源，硕士邦德UV18MED固化后形成具有优良的电绝缘性能持久，强大，灵活和高耐化学性的系统。 最快得到治愈与在250-365纳米波长的发光光源。 治愈后的收缩率大大低于传统的紫外线系统少。 固化后的涂料和胶粘剂/密封剂可用于在极宽的温度范围-80 ° F至250 ° F。 与许多其他商用UV固化产品，硕士邦德UV18MED没有​​氧气抑制和展品甚至在空气中存在a刻意快速治愈率。 性能优越的UV18MED轮廓是由于其独特的疏水性聚合物骨架结构，其特殊的自由基固化的机制。 硕士邦德聚合物系统UV18MED具有优良的耐化学性，水，异丙醇，乙醇，丙酮，丁酮等，以及高达20％硫酸，20％的氢氧化钠和许多其他有腐蚀性的溶剂。 相对于其他紫外光固化系统的水蒸汽渗透性也非常好。 硕士邦德UV18MED可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV18MED形式坚韧，耐用的债券和密封件。 它坚持了包括玻璃，金属和塑料子状态广泛。 它的冲击强度优良，加德纳影响测量超过320英寸磅典型UV18MED涂料性能列于表1。 储存硕士邦德UV18MED稳定为6个月未开封下的正常储存条件。

Master Bond UV18MED is a new one component, high strength UV curable system with superb chemical resistance & flexibility for coating, sealing and bonding. It is a 100% reactive, mobile liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV18MED cures to form a durable, strong, flexible and highly chemically resistant system with excellent electrical insulation properties. Fastest cures are obtained with light sources emitting at a wave length of 250-365 nm. Shrinkage upon cure is substantially less than that of conventional UV systems. The cured coatings and adhesive/sealants can be used over the exceptionally wide temperature range of -80°F to 250°F. Unlike many other commercially available UV curable products, Master Bond UV18MED is not oxygen inhibited and exhibits a desirably fast cure rate even in the presence of air. The superior performance profile of UV18MED is due to its unique hydrophobic polymer backbone structure and its special free radical cure mechanism. Master Bond Polymer System UV18MED features excellent chemical resistance to water, isopropyl alcohol, ethanol, acetone, MEK, etc. as well as up to 20% sulfuric acid, 20% sodium hydroxide and many other aggressive solvents. Compared to other UV curable systems water vapor permeability is also excellent. Master Bond UV18MED can be cured in very short time periods, e.g. 1 minute or less, with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV18MED forms tough, durable bonds and seals. It adheres to a wide range of substates including glass, metals and plastics. The impact strength is excellent, gardner impact measurements exceed 320 inch lb. Properties of typical UV18MED coatings are summarized in table #1. Storage stability of Master Bond UV18MED is 6 months under the usual storage conditions in unopened containers.