硕士邦德聚合物系统UV10LC – 12是最近发展起来的一个组件高性能聚合物系统，可以很容易地暴露在可见光或紫外光固化。 UV10LC – 12可作为粘合剂，密封剂，涂料或浇注料。 该产品提供了优异的物理强度性能，精湛的韧性，杰出的耐磨性和优良的热循环能力。 此外，已通过VI级的测试要求。 然而，最终用户，强烈建议进行任何额外的测试，可以针对特定应用所需的最终产品。 UV10LC – 12，尤其是在制造，修理和牙冠修复牙科行业有益。 在这方面，它具有优异的附着力缩醛和丙烯酸树脂。 它是100％反应，不含有溶剂或其他挥发性物质。 硕士邦德UV10LC – 12债券很好地相似，不同的基材包括金属，玻璃，陶瓷，橡胶，如选择聚碳酸酯，丙烯酸树脂，缩醛和ABS各种塑料。 硕士邦德UV10LC – 12具有优良的热性能和电气绝缘性能。 固化后的聚合物组成的优长水长期性，盐溶液，医疗和牙科类型serilants。 该系统还提供了极好的尺寸稳定性和极低的收缩后治愈。 使用温度范围为-80 ° F至+250 ° F。 UV10LC – 12是一种“双重固化”的制度。 它可以很容易地治愈市售可见光固化系统，如目前具有最佳的医疗和牙科固化到波长在430 – 460nm的地方等行业。 它也可以被治愈暴露在紫外线高达30-40毫瓦的小发光光源在320 – 365nm的波长/厘米²的能量。 该UV10LC – 12将完全固化在很短的时间内的环境后，被治愈的层，光强度和从材料厚度不同光源距离的温度。 固化时间从几秒钟到不足一两分钟。 这些疗法无空气相对抑制，即使低强度的光源使用。 固化后UV10LC – 12高分子化合物的性能属性是否相同或不可见或UV光固化灯就业。 该UV10LC – 12的能力受到接触可见光或紫外线光源固化大大提高了对这一独特的产品应用范围的潜力。

Master Bond Polymer System UV10LC-12 is a recently developed one component high performance polymer system which can be readily cured by exposure to either visible or UV light. UV10LC-12 can be used as an adhesive, sealant, coating or casting material. This product offers excellent physical strength properties, superb toughness, outstanding abrasion resistance and excellent thermal cycling capabilities. In addition, it has passed Class VI testing requirements. However, the end user is strongly advised to conduct any additional testing that may be required for specific end product applications. UV10LC-12 is particularly useful in the dental industry in the manufacturing, repair and restoration of dental crowns. In this regard, it has excellent adhesion to acetals and acrylics. It is 100% reactive and does not contain solvents or other volatiles. Master Bond UV10LC-12 bonds very well to similar and dissimilar substrates including metals, glass, ceramics, selected rubbers and various plastics such as polycarbonates, acrylics, acetals and ABS. Master Bond UV10LC-12 possesses excellent thermal and electrical insulation properties. The cured polymer composition has excellent long term resistance to water, saline solutions, and medical and dental type serilants. This system also offers superb dimensional stability and very low shrinkage upon cure. The service temperature range is -80°F to +250°F. UV10LC-12 is a “dual cure” system. It can be readily cured with commercially available visible light curing system, such as currently used by the medical and dental industries with optimum curing taking place at wavelengths between 430-460nm. It can also be cured by exposure to UV light sources emitting as little as 30-40 milliwatts/cm² of energy at wavelengths of 320-365nm. The UV10LC-12 will fully cure at ambient temperatures within very short times depending upon the thickness of the layer being cured, the light intensity and distance of the light source from the material. Cure times range from a few seconds to less than a minute or two. These cures are not air inhibited even when relatively low intensity light sources are used. The performance properties of the cured UV10LC-12 polymer compound are identical whether or not visible or UV light curing lamps are employed. The ability of UV10LC-12 to be cured by exposure to either visible or UV light sources greatly enhances the potential range of applications for this unique product.

硕士邦德聚合物系统UV10LC – 12是最近发展起来的一个组件高性能聚合物系统，可以很容易地暴露在可见光或紫外光固化。 UV10LC – 12可作为粘合剂，密封剂，涂料或浇注料。 该产品提供了优异的物理强度性能，精湛的韧性，杰出的耐磨性和优良的热循环能力。 此外，已通过VI级的测试要求。 然而，最终用户，强烈建议进行任何额外的测试，可以针对特定应用所需的最终产品。 UV10LC – 12，尤其是在制造，修理和牙冠修复牙科行业有益。 在这方面，它具有优异的附着力缩醛和丙烯酸树脂。 它是100％反应，不含有溶剂或其他挥发性物质。 硕士邦德UV10LC – 12债券很好地相似，不同的基材包括金属，玻璃，陶瓷，橡胶，如选择聚碳酸酯，丙烯酸树脂，缩醛和ABS各种塑料。 硕士邦德UV10LC – 12具有优良的热性能和电气绝缘性能。 固化后的聚合物组成的优长水长期性，盐溶液，医疗和牙科类型serilants。 该系统还提供了极好的尺寸稳定性和极低的收缩后治愈。 使用温度范围为-80 ° F至+250 ° F。 UV10LC – 12是一种“双重固化”的制度。 它可以很容易地治愈市售可见光固化系统，如目前具有最佳的医疗和牙科固化到波长在430 – 460nm的地方等行业。 它也可以被治愈暴露在紫外线高达30-40毫瓦的小发光光源在320 – 365nm的波长/厘米²的能量。 该UV10LC – 12将完全固化在很短的时间内的环境后，被治愈的层，光强度和从材料厚度不同光源距离的温度。 固化时间从几秒钟到不足一两分钟。 这些疗法无空气相对抑制，即使低强度的光源使用。 固化后UV10LC – 12高分子化合物的性能属性是否相同或不可见或UV光固化灯就业。 该UV10LC – 12的能力受到接触可见光或紫外线光源固化大大提高了对这一独特的产品应用范围的潜力。

Master Bond Polymer System UV10LC-12 is a recently developed one component high performance polymer system which can be readily cured by exposure to either visible or UV light. UV10LC-12 can be used as an adhesive, sealant, coating or casting material. This product offers excellent physical strength properties, superb toughness, outstanding abrasion resistance and excellent thermal cycling capabilities. In addition, it has passed Class VI testing requirements. However, the end user is strongly advised to conduct any additional testing that may be required for specific end product applications. UV10LC-12 is particularly useful in the dental industry in the manufacturing, repair and restoration of dental crowns. In this regard, it has excellent adhesion to acetals and acrylics. It is 100% reactive and does not contain solvents or other volatiles. Master Bond UV10LC-12 bonds very well to similar and dissimilar substrates including metals, glass, ceramics, selected rubbers and various plastics such as polycarbonates, acrylics, acetals and ABS. Master Bond UV10LC-12 possesses excellent thermal and electrical insulation properties. The cured polymer composition has excellent long term resistance to water, saline solutions, and medical and dental type serilants. This system also offers superb dimensional stability and very low shrinkage upon cure. The service temperature range is -80°F to +250°F. UV10LC-12 is a “dual cure” system. It can be readily cured with commercially available visible light curing system, such as currently used by the medical and dental industries with optimum curing taking place at wavelengths between 430-460nm. It can also be cured by exposure to UV light sources emitting as little as 30-40 milliwatts/cm² of energy at wavelengths of 320-365nm. The UV10LC-12 will fully cure at ambient temperatures within very short times depending upon the thickness of the layer being cured, the light intensity and distance of the light source from the material. Cure times range from a few seconds to less than a minute or two. These cures are not air inhibited even when relatively low intensity light sources are used. The performance properties of the cured UV10LC-12 polymer compound are identical whether or not visible or UV light curing lamps are employed. The ability of UV10LC-12 to be cured by exposure to either visible or UV light sources greatly enhances the potential range of applications for this unique product.

硕士邦德聚合物系统UV10LC – 12是最近发展起来的一个组件高性能聚合物系统，可以很容易地暴露在可见光或紫外光固化。 UV10LC – 12可作为粘合剂，密封剂，涂料或浇注料。 该产品提供了优异的物理强度性能，精湛的韧性，杰出的耐磨性和优良的热循环能力。 此外，已通过VI级的测试要求。 然而，最终用户，强烈建议进行任何额外的测试，可以针对特定应用所需的最终产品。 UV10LC – 12，尤其是在制造，修理和牙冠修复牙科行业有益。 在这方面，它具有优异的附着力缩醛和丙烯酸树脂。 它是100％反应，不含有溶剂或其他挥发性物质。 硕士邦德UV10LC – 12债券很好地相似，不同的基材包括金属，玻璃，陶瓷，橡胶，如选择聚碳酸酯，丙烯酸树脂，缩醛和ABS各种塑料。 硕士邦德UV10LC – 12具有优良的热性能和电气绝缘性能。 固化后的聚合物组成的优长水长期性，盐溶液，医疗和牙科类型serilants。 该系统还提供了极好的尺寸稳定性和极低的收缩后治愈。 使用温度范围为-80 ° F至+250 ° F。 UV10LC – 12是一种“双重固化”的制度。 它可以很容易地治愈市售可见光固化系统，如目前具有最佳的医疗和牙科固化到波长在430 – 460nm的地方等行业。 它也可以被治愈暴露在紫外线高达30-40毫瓦的小发光光源在320 – 365nm的波长/厘米²的能量。 该UV10LC – 12将完全固化在很短的时间内的环境后，被治愈的层，光强度和从材料厚度不同光源距离的温度。 固化时间从几秒钟到不足一两分钟。 这些疗法无空气相对抑制，即使低强度的光源使用。 固化后UV10LC – 12高分子化合物的性能属性是否相同或不可见或UV光固化灯就业。 该UV10LC – 12的能力受到接触可见光或紫外线光源固化大大提高了对这一独特的产品应用范围的潜力。

Master Bond Polymer System UV10LC-12 is a recently developed one component high performance polymer system which can be readily cured by exposure to either visible or UV light. UV10LC-12 can be used as an adhesive, sealant, coating or casting material. This product offers excellent physical strength properties, superb toughness, outstanding abrasion resistance and excellent thermal cycling capabilities. In addition, it has passed Class VI testing requirements. However, the end user is strongly advised to conduct any additional testing that may be required for specific end product applications. UV10LC-12 is particularly useful in the dental industry in the manufacturing, repair and restoration of dental crowns. In this regard, it has excellent adhesion to acetals and acrylics. It is 100% reactive and does not contain solvents or other volatiles. Master Bond UV10LC-12 bonds very well to similar and dissimilar substrates including metals, glass, ceramics, selected rubbers and various plastics such as polycarbonates, acrylics, acetals and ABS. Master Bond UV10LC-12 possesses excellent thermal and electrical insulation properties. The cured polymer composition has excellent long term resistance to water, saline solutions, and medical and dental type serilants. This system also offers superb dimensional stability and very low shrinkage upon cure. The service temperature range is -80°F to +250°F. UV10LC-12 is a “dual cure” system. It can be readily cured with commercially available visible light curing system, such as currently used by the medical and dental industries with optimum curing taking place at wavelengths between 430-460nm. It can also be cured by exposure to UV light sources emitting as little as 30-40 milliwatts/cm² of energy at wavelengths of 320-365nm. The UV10LC-12 will fully cure at ambient temperatures within very short times depending upon the thickness of the layer being cured, the light intensity and distance of the light source from the material. Cure times range from a few seconds to less than a minute or two. These cures are not air inhibited even when relatively low intensity light sources are used. The performance properties of the cured UV10LC-12 polymer compound are identical whether or not visible or UV light curing lamps are employed. The ability of UV10LC-12 to be cured by exposure to either visible or UV light sources greatly enhances the potential range of applications for this unique product.