硕士邦德UV15是一个新的组件，高强度，低粘度，UV固化环氧树脂基聚合物的粘接，密封系统，具有极高的性能和特性的涂层。 这是一个100％反应，不含有任何溶剂或其他挥发性物质。 当暴露在紫外线光源，硕士邦德UV15产生具有优良的电绝缘性能耐用，结实，坚韧和耐化学腐蚀涂料，债券和海豹。 使用快速固化发生在250-365纳米波长的发光光源，在低至20％至40厘米毫瓦的能量平方米，为更快治愈高强度。 治愈后，收缩率是2-3％，明显高于紫外光固化成分自由基类型表现为低。 UV15可在极宽的温度范围-60 ° F至300 ° F。 UV15可以治愈，厚度达一英寸多0.030。 与许多其他商用UV固化产品，硕士邦德UV15没有氧气抑制和展品，即使在环境温度下空气中存在刻意快速治愈率。 性能优越的UV15轮廓是由于其卓越成效阳离子催化剂的固化机制。 固化后的UV15 90 °至125 ° C，30分钟就会给它一个玻璃化转变温度超过125 ° C，远远高于传统型UV系统更高。 这篇文章固化，也提高耐化学性，特别是溶剂有效。 硕士邦德UV15可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯的环境温度。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV15具有优异的粘接的基材种类繁多，包括塑料，玻璃和许多金属。 冲击强度高 – 加德纳影响测量超过320英寸＃。 对UV15属性列于表1。 储存硕士邦德UV15稳定是6在室温未开封的容器温度个月。

Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV15 produces durable, strong, tough and chemically resistant coatings, bonds and seals with excellent electrical insulation properties. Fast cures take place using light sources emitting at a wave length of 250-365 nm, at as low as 20-40 milliwatts per cm² of energy and with higher intensities for faster cures. Shrinkage upon cure is 2-3%, significantly lower than that exhibited by free radical types of UV curable compositions. UV15 can be used over the exceptionally wide temperature range of -60°F to 300°F. UV15 will cure in thicknesses up to .030 of an inch and more. Unlike many other commercially available UV curable products, Master Bond UV15 is not oxygen inhibited and exhibits a desirably fast cure rate at ambient temperatures even in the presence of air. The superior performance profile of UV15 is due to its exceptionally effective cationic catalyst curing mechanism. Post curing the UV15 at 90° to 125°C for 30 minutes will give it a glass transition temperature over 125°C, far higher than conventional type UV systems. This post cure is also effective in enhancing chemical resistance, particularly to solvents. Master Bond UV15 can be cured in very short time periods, e.g. 1 minute or less, at ambient temperatures with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV15 has excellent adhesion to a wide variety of substrates including plastics, glass and many metals. Impact strengths are high – Gardner impact measurements exceed 320 inch #. Properties of UV15 are summarized in table #1. Storage stability of Master Bond UV15 is 6 months at room temperature in unopened containers.

硕士邦德UV15是一个新的组件，高强度，低粘度，UV固化环氧树脂基聚合物的粘接，密封系统，具有极高的性能和特性的涂层。 这是一个100％反应，不含有任何溶剂或其他挥发性物质。 当暴露在紫外线光源，硕士邦德UV15产生具有优良的电绝缘性能耐用，结实，坚韧和耐化学腐蚀涂料，债券和海豹。 使用快速固化发生在250-365纳米波长的发光光源，在低至20％至40厘米毫瓦的能量平方米，为更快治愈高强度。 治愈后，收缩率是2-3％，明显高于紫外光固化成分自由基类型表现为低。 UV15可在极宽的温度范围-60 ° F至300 ° F。 UV15可以治愈，厚度达一英寸多0.030。 与许多其他商用UV固化产品，硕士邦德UV15没有氧气抑制和展品，即使在环境温度下空气中存在刻意快速治愈率。 性能优越的UV15轮廓是由于其卓越成效阳离子催化剂的固化机制。 固化后的UV15 90 °至125 ° C，30分钟就会给它一个玻璃化转变温度超过125 ° C，远远高于传统型UV系统更高。 这篇文章固化，也提高耐化学性，特别是溶剂有效。 硕士邦德UV15可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯的环境温度。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV15具有优异的粘接的基材种类繁多，包括塑料，玻璃和许多金属。 冲击强度高 – 加德纳影响测量超过320英寸＃。 对UV15属性列于表1。 储存硕士邦德UV15稳定是6在室温未开封的容器温度个月。

Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV15 produces durable, strong, tough and chemically resistant coatings, bonds and seals with excellent electrical insulation properties. Fast cures take place using light sources emitting at a wave length of 250-365 nm, at as low as 20-40 milliwatts per cm² of energy and with higher intensities for faster cures. Shrinkage upon cure is 2-3%, significantly lower than that exhibited by free radical types of UV curable compositions. UV15 can be used over the exceptionally wide temperature range of -60°F to 300°F. UV15 will cure in thicknesses up to .030 of an inch and more. Unlike many other commercially available UV curable products, Master Bond UV15 is not oxygen inhibited and exhibits a desirably fast cure rate at ambient temperatures even in the presence of air. The superior performance profile of UV15 is due to its exceptionally effective cationic catalyst curing mechanism. Post curing the UV15 at 90° to 125°C for 30 minutes will give it a glass transition temperature over 125°C, far higher than conventional type UV systems. This post cure is also effective in enhancing chemical resistance, particularly to solvents. Master Bond UV15 can be cured in very short time periods, e.g. 1 minute or less, at ambient temperatures with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV15 has excellent adhesion to a wide variety of substrates including plastics, glass and many metals. Impact strengths are high – Gardner impact measurements exceed 320 inch #. Properties of UV15 are summarized in table #1. Storage stability of Master Bond UV15 is 6 months at room temperature in unopened containers.

硕士邦德UV15是一个新的组件，高强度，低粘度，UV固化环氧树脂基聚合物的粘接，密封系统，具有极高的性能和特性的涂层。 这是一个100％反应，不含有任何溶剂或其他挥发性物质。 当暴露在紫外线光源，硕士邦德UV15产生具有优良的电绝缘性能耐用，结实，坚韧和耐化学腐蚀涂料，债券和海豹。 使用快速固化发生在250-365纳米波长的发光光源，在低至20％至40厘米毫瓦的能量平方米，为更快治愈高强度。 治愈后，收缩率是2-3％，明显高于紫外光固化成分自由基类型表现为低。 UV15可在极宽的温度范围-60 ° F至300 ° F。 UV15可以治愈，厚度达一英寸多0.030。 与许多其他商用UV固化产品，硕士邦德UV15没有氧气抑制和展品，即使在环境温度下空气中存在刻意快速治愈率。 性能优越的UV15轮廓是由于其卓越成效阳离子催化剂的固化机制。 固化后的UV15 90 °至125 ° C，30分钟就会给它一个玻璃化转变温度超过125 ° C，远远高于传统型UV系统更高。 这篇文章固化，也提高耐化学性，特别是溶剂有效。 硕士邦德UV15可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯的环境温度。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV15具有优异的粘接的基材种类繁多，包括塑料，玻璃和许多金属。 冲击强度高 – 加德纳影响测量超过320英寸＃。 对UV15属性列于表1。 储存硕士邦德UV15稳定是6在室温未开封的容器温度个月。

Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV15 produces durable, strong, tough and chemically resistant coatings, bonds and seals with excellent electrical insulation properties. Fast cures take place using light sources emitting at a wave length of 250-365 nm, at as low as 20-40 milliwatts per cm² of energy and with higher intensities for faster cures. Shrinkage upon cure is 2-3%, significantly lower than that exhibited by free radical types of UV curable compositions. UV15 can be used over the exceptionally wide temperature range of -60°F to 300°F. UV15 will cure in thicknesses up to .030 of an inch and more. Unlike many other commercially available UV curable products, Master Bond UV15 is not oxygen inhibited and exhibits a desirably fast cure rate at ambient temperatures even in the presence of air. The superior performance profile of UV15 is due to its exceptionally effective cationic catalyst curing mechanism. Post curing the UV15 at 90° to 125°C for 30 minutes will give it a glass transition temperature over 125°C, far higher than conventional type UV systems. This post cure is also effective in enhancing chemical resistance, particularly to solvents. Master Bond UV15 can be cured in very short time periods, e.g. 1 minute or less, at ambient temperatures with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV15 has excellent adhesion to a wide variety of substrates including plastics, glass and many metals. Impact strengths are high – Gardner impact measurements exceed 320 inch #. Properties of UV15 are summarized in table #1. Storage stability of Master Bond UV15 is 6 months at room temperature in unopened containers.

硕士邦德UV15是一个新的组件，高强度，低粘度，UV固化环氧树脂基聚合物的粘接，密封系统，具有极高的性能和特性的涂层。 这是一个100％反应，不含有任何溶剂或其他挥发性物质。 当暴露在紫外线光源，硕士邦德UV15产生具有优良的电绝缘性能耐用，结实，坚韧和耐化学腐蚀涂料，债券和海豹。 使用快速固化发生在250-365纳米波长的发光光源，在低至20％至40厘米毫瓦的能量平方米，为更快治愈高强度。 治愈后，收缩率是2-3％，明显高于紫外光固化成分自由基类型表现为低。 UV15可在极宽的温度范围-60 ° F至300 ° F。 UV15可以治愈，厚度达一英寸多0.030。 与许多其他商用UV固化产品，硕士邦德UV15没有氧气抑制和展品，即使在环境温度下空气中存在刻意快速治愈率。 性能优越的UV15轮廓是由于其卓越成效阳离子催化剂的固化机制。 固化后的UV15 90 °至125 ° C，30分钟就会给它一个玻璃化转变温度超过125 ° C，远远高于传统型UV系统更高。 这篇文章固化，也提高耐化学性，特别是溶剂有效。 硕士邦德UV15可以治愈在很短的时间段，如1分钟或更少的各种商业紫外线灯的环境温度。 一个传统的200瓦特/英寸的中压汞灯建议。 即使低强度紫外光源，可迅速治愈。 无溶剂或其他挥发性物质被释放在固化过程。 UV15具有优异的粘接的基材种类繁多，包括塑料，玻璃和许多金属。 冲击强度高 – 加德纳影响测量超过320英寸＃。 对UV15属性列于表1。 储存硕士邦德UV15稳定是6在室温未开封的容器温度个月。

Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source of UV light, Master Bond UV15 produces durable, strong, tough and chemically resistant coatings, bonds and seals with excellent electrical insulation properties. Fast cures take place using light sources emitting at a wave length of 250-365 nm, at as low as 20-40 milliwatts per cm² of energy and with higher intensities for faster cures. Shrinkage upon cure is 2-3%, significantly lower than that exhibited by free radical types of UV curable compositions. UV15 can be used over the exceptionally wide temperature range of -60°F to 300°F. UV15 will cure in thicknesses up to .030 of an inch and more. Unlike many other commercially available UV curable products, Master Bond UV15 is not oxygen inhibited and exhibits a desirably fast cure rate at ambient temperatures even in the presence of air. The superior performance profile of UV15 is due to its exceptionally effective cationic catalyst curing mechanism. Post curing the UV15 at 90° to 125°C for 30 minutes will give it a glass transition temperature over 125°C, far higher than conventional type UV systems. This post cure is also effective in enhancing chemical resistance, particularly to solvents. Master Bond UV15 can be cured in very short time periods, e.g. 1 minute or less, at ambient temperatures with various commercial UV lamps. A conventional 200 watt/inch medium pressure mercury lamp is recommended. Even with low intensity UV sources, cures can be obtained quickly. No solvents or other volatiles are released during the curing process. UV15 has excellent adhesion to a wide variety of substrates including plastics, glass and many metals. Impact strengths are high – Gardner impact measurements exceed 320 inch #. Properties of UV15 are summarized in table #1. Storage stability of Master Bond UV15 is 6 months at room temperature in unopened containers.