硕士邦德UV10和UV10TK是一个组件紫外光固化改性环氧化合物，即可使用所提供产品，用于高性能铸造，涂料，密封和粘接应用。 UV10是一种低粘度在室温下琥珀色液体和UV10TK是一种中等粘度在室温下琥珀色液体。 当暴露在紫外线灯光源这些化合物的形成具有超强的耐化学性强的债券，涂料，密封件和铸件。 快速固化发生使用快速固化光源在发光波长为320-360在高达20％至40厘米毫瓦的低能量和高²。 UV10或UV10TK可以转换为.125“厚度。硕士邦德UV10和UV10TK不氧抑制，因此不需要惰性气体，高粘接强度与金属，陶瓷，玻璃，造纸，许多塑料和弹性体获得。龙这些产品的长期耐用性极佳，即使暴露在包括热和潮湿的不利环境条​​件的硕士邦德UV10和UV10TK优越的性能配置，是由于其独特的化学成分。硕士邦德UV10和UV10TK是一个多官能环氧树脂基并包含一个非常有效的潜在UV固化剂系统，快速固化的机制是任何的紫外光以每英寸的中压汞灯200瓦特来源方便等引发的，随着商业紫外线灯，治疗已很短的时间内生效期间，如1分钟，在环境温度低，即使低强度紫外光源，专治可在几分钟内获得的，没有溶剂或其他挥发性物质被释放在固化过程。

Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room temperature. When exposed to a source of UV light these compounds form strong bonds, coatings, seals and castings with superior chemical resistance. Fast cures take place using light sources emitting at a wavelength of 320-360 nm at as low as 20-40 milliwatts per cm² of energy and higher for faster cures. UV10 or UV10TK can be cast to .125″ thickness. Master Bond UV10 and UV10TK are not oxygen inhibited and therefore do not require an inert atmosphere. High bond strengths are obtained with metals, ceramics, glass, paper, many plastics and elastomers. Long term durability of these products is excellent even when exposed to adverse environmental conditions including heat and moisture. The superior performance profile of the Master Bond UV10 and UV10TK is due to their unique chemical composition. Master Bond UV10 and UV10TK are based on a polyfunctional epoxy resin and contain an exceptionally effective latent UV curing agent system. The fast curing mechanism is triggered by any convenient source of UV light such as a 200 watt per inch medium pressure mercury vapor lamp. With commercial UV lamps, cures have been effected in very short time periods, e.g., 1 minute and less at ambient temperatures. Even with low intensity UV sources, cures can be obtained in minutes. No solvents or other volatiles are released during the curing process.

硕士邦德UV10和UV10TK是一个组件紫外光固化改性环氧化合物，即可使用所提供产品，用于高性能铸造，涂料，密封和粘接应用。 UV10是一种低粘度在室温下琥珀色液体和UV10TK是一种中等粘度在室温下琥珀色液体。 当暴露在紫外线灯光源这些化合物的形成具有超强的耐化学性强的债券，涂料，密封件和铸件。 快速固化发生使用快速固化光源在发光波长为320-360在高达20％至40厘米毫瓦的低能量和高²。 UV10或UV10TK可以转换为.125“厚度。硕士邦德UV10和UV10TK不氧抑制，因此不需要惰性气体，高粘接强度与金属，陶瓷，玻璃，造纸，许多塑料和弹性体获得。龙这些产品的长期耐用性极佳，即使暴露在包括热和潮湿的不利环境条​​件的硕士邦德UV10和UV10TK优越的性能配置，是由于其独特的化学成分。硕士邦德UV10和UV10TK是一个多官能环氧树脂基并包含一个非常有效的潜在UV固化剂系统，快速固化的机制是任何的紫外光以每英寸的中压汞灯200瓦特来源方便等引发的，随着商业紫外线灯，治疗已很短的时间内生效期间，如1分钟，在环境温度低，即使低强度紫外光源，专治可在几分钟内获得的，没有溶剂或其他挥发性物质被释放在固化过程。

Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room temperature. When exposed to a source of UV light these compounds form strong bonds, coatings, seals and castings with superior chemical resistance. Fast cures take place using light sources emitting at a wavelength of 320-360 nm at as low as 20-40 milliwatts per cm² of energy and higher for faster cures. UV10 or UV10TK can be cast to .125″ thickness. Master Bond UV10 and UV10TK are not oxygen inhibited and therefore do not require an inert atmosphere. High bond strengths are obtained with metals, ceramics, glass, paper, many plastics and elastomers. Long term durability of these products is excellent even when exposed to adverse environmental conditions including heat and moisture. The superior performance profile of the Master Bond UV10 and UV10TK is due to their unique chemical composition. Master Bond UV10 and UV10TK are based on a polyfunctional epoxy resin and contain an exceptionally effective latent UV curing agent system. The fast curing mechanism is triggered by any convenient source of UV light such as a 200 watt per inch medium pressure mercury vapor lamp. With commercial UV lamps, cures have been effected in very short time periods, e.g., 1 minute and less at ambient temperatures. Even with low intensity UV sources, cures can be obtained in minutes. No solvents or other volatiles are released during the curing process.

硕士邦德UV10和UV10TK是一个组件紫外光固化改性环氧化合物，即可使用所提供产品，用于高性能铸造，涂料，密封和粘接应用。 UV10是一种低粘度在室温下琥珀色液体和UV10TK是一种中等粘度在室温下琥珀色液体。 当暴露在紫外线灯光源这些化合物的形成具有超强的耐化学性强的债券，涂料，密封件和铸件。 快速固化发生使用快速固化光源在发光波长为320-360在高达20％至40厘米毫瓦的低能量和高²。 UV10或UV10TK可以转换为.125“厚度。硕士邦德UV10和UV10TK不氧抑制，因此不需要惰性气体，高粘接强度与金属，陶瓷，玻璃，造纸，许多塑料和弹性体获得。龙这些产品的长期耐用性极佳，即使暴露在包括热和潮湿的不利环境条​​件的硕士邦德UV10和UV10TK优越的性能配置，是由于其独特的化学成分。硕士邦德UV10和UV10TK是一个多官能环氧树脂基并包含一个非常有效的潜在UV固化剂系统，快速固化的机制是任何的紫外光以每英寸的中压汞灯200瓦特来源方便等引发的，随着商业紫外线灯，治疗已很短的时间内生效期间，如1分钟，在环境温度低，即使低强度紫外光源，专治可在几分钟内获得的，没有溶剂或其他挥发性物质被释放在固化过程。

Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room temperature. When exposed to a source of UV light these compounds form strong bonds, coatings, seals and castings with superior chemical resistance. Fast cures take place using light sources emitting at a wavelength of 320-360 nm at as low as 20-40 milliwatts per cm² of energy and higher for faster cures. UV10 or UV10TK can be cast to .125″ thickness. Master Bond UV10 and UV10TK are not oxygen inhibited and therefore do not require an inert atmosphere. High bond strengths are obtained with metals, ceramics, glass, paper, many plastics and elastomers. Long term durability of these products is excellent even when exposed to adverse environmental conditions including heat and moisture. The superior performance profile of the Master Bond UV10 and UV10TK is due to their unique chemical composition. Master Bond UV10 and UV10TK are based on a polyfunctional epoxy resin and contain an exceptionally effective latent UV curing agent system. The fast curing mechanism is triggered by any convenient source of UV light such as a 200 watt per inch medium pressure mercury vapor lamp. With commercial UV lamps, cures have been effected in very short time periods, e.g., 1 minute and less at ambient temperatures. Even with low intensity UV sources, cures can be obtained in minutes. No solvents or other volatiles are released during the curing process.