硕士邦德聚合物系统X17HV是一种专门配制的单组分聚合物组成专门设计用于粘接，密封和修复聚烯烃如聚丙烯，聚乙烯，以及他们的许多合作，包括聚合物和热塑性弹性体的混合物。 这种合成弹性体的复合呈现出两个剪切和剥离性能独特的平衡等基材粘接时给对方，以及包括软质PVC与基板。 硕士邦德聚合物系统X17HV含有42-45％重量的固体，并精心制定了混合溶剂的蒸发，容易与治疗的收益。 X17HV效果最好时表面后，立即应用到每个基复合治疗。 初始设置强度通常足以维持在位置处理大会。 粘结强度逐渐增大，作为溶剂蒸发的进展，并与一些信徒有可能接近的基板材料的强度。 硕士邦德聚合物系统X17HV连续层可用于增加X17HV聚合物涂层厚度。 粘结强度最大时，得到的溶剂完全蒸发。 最佳性能的债券可在12-24小时内环境温度。 虽然添加热不医治强制性的，温和的热应用（120 ° F – 180 ° F），将大大加快固化速度和最终粘接强度也显着增加。 所有基材应该是油脂，污垢，油和其他污染物的最佳效果。 如溶剂清洗和蒸汽脱脂常规清洗方法被推荐为最大粘接强度。 该产品的功能也为聚烯烃如聚乙烯和聚丙烯，本身与诸如环氧树脂，聚氨酯粘合剂结合各种热塑性弹性体表面的有效引物，聚合物等硕士邦德系统X17HV是一种高粘度流动性液体。 它可以稀释各种酮和芳香溶剂。 硕士邦德固化密封胶聚合物X17HV保留，即使长期暴露在水和醇，脂肪烃，包括许多其他化学品的实力突出特性。 十字划痕胶带附着力测试后给予只是空气干燥固化方法的优异成绩。 硕士邦德聚合物系统X17HV提供了一个简单易用，技术上有效解决了粘接，密封等问题，难以坚持修复和维修聚烯烃基材。 它代表了高性能聚烯烃和热塑性弹性体的粘接，密封和粘接修复应用系统制定重大进展。 由于主键X17HV含有挥发性溶剂，必须受聘于一个通风服用处理挥发包括高分子材料领域的所有必要的预防措施。

Master Bond Polymer System X17HV is a specially formulated one component polymer composition especially designed for bonding, sealing and repairing polyolefins such as polypropylene, polyethylene as well as their many co-polymers and blends including thermoplastic elastomers. This synthetic elastomer based compound exhibits a unique balance of both shear and peel properties when bonding such substrates to each other, as well as to related substrates including flexible PVC. Master Bond Polymer Systems X17HV contains 42-45% by weight solids and has a carefully formulated solvent blend which readily evaporates as cure proceeds. X17HV works best when surfaces are treated immediately after the application compound to each substrate. The strength of the initial set usually suffices to maintain the assembly in position for handling. Bond strength increases gradually as evaporation of the solvent progresses and with some adherents it might approach the strength of the substrate materials. Successive layers of Master Bond Polymer Systems X17HV can be applied to increase the thickness of X17HV polymer coating. Maximum bond strength is obtained upon complete evaporation of the solvent. Optimal performance bonds can be obtained at ambient temperatures within 12-24 hours. Although adding heat is not obligatory for curing, application of moderate heat (120°F-180°F) will greatly accelerate the rate of cure and also increase final bond strengths significantly. All substrates should be free of grease, dirt, oil and other contaminants for best results. Conventional cleaning methods such as solvent washing and vapor degreasing are recommended for maximum bond strength. This product function also an effective primer for polyolefins and various thermoplastic elastomer surfaces such as polyethylene and polypropylene per se and in conjunction with adhesives such as epoxies, urethanes, etc. Master Bond Polymer System X17HV is a high viscosity flowable liquid. It can be thinned with various ketone and aromatic solvents. Cured Master Bond Polymer X17HV sealant retains its outstanding strength properties even after prolonged exposure to water and many other chemicals including alcohols and aliphatic hydrocarbons. Cross hatch tape adhesion tests have given outstanding results after merely air dry curing methods. Master Bond Polymer System X17HV offers a simple to use, technically effective solution to the problem of bonding, sealing and repair such difficult to adhere and repair polyolefin substrates. It represents a major advance in the formulation of high performance polyolefin and thermoplastic elastomer bonding, sealing and repair applications bonding systems. Since Master Bond X17HV contains volatile solvents it must be employed in a ventilated area taking all necessary precautions for handling polymeric materials comprising of volatiles.

硕士邦德聚合物系统X17HV是一种专门配制的单组分聚合物组成专门设计用于粘接，密封和修复聚烯烃如聚丙烯，聚乙烯，以及他们的许多合作，包括聚合物和热塑性弹性体的混合物。 这种合成弹性体的复合呈现出两个剪切和剥离性能独特的平衡等基材粘接时给对方，以及包括软质PVC与基板。 硕士邦德聚合物系统X17HV含有42-45％重量的固体，并精心制定了混合溶剂的蒸发，容易与治疗的收益。 X17HV效果最好时表面后，立即应用到每个基复合治疗。 初始设置强度通常足以维持在位置处理大会。 粘结强度逐渐增大，作为溶剂蒸发的进展，并与一些信徒有可能接近的基板材料的强度。 硕士邦德聚合物系统X17HV连续层可用于增加X17HV聚合物涂层厚度。 粘结强度最大时，得到的溶剂完全蒸发。 最佳性能的债券可在12-24小时内环境温度。 虽然添加热不医治强制性的，温和的热应用（120 ° F – 180 ° F），将大大加快固化速度和最终粘接强度也显着增加。 所有基材应该是油脂，污垢，油和其他污染物的最佳效果。 如溶剂清洗和蒸汽脱脂常规清洗方法被推荐为最大粘接强度。 该产品的功能也为聚烯烃如聚乙烯和聚丙烯，本身与诸如环氧树脂，聚氨酯粘合剂结合各种热塑性弹性体表面的有效引物，聚合物等硕士邦德系统X17HV是一种高粘度流动性液体。 它可以稀释各种酮和芳香溶剂。 硕士邦德固化密封胶聚合物X17HV保留，即使长期暴露在水和醇，脂肪烃，包括许多其他化学品的实力突出特性。 十字划痕胶带附着力测试后给予只是空气干燥固化方法的优异成绩。 硕士邦德聚合物系统X17HV提供了一个简单易用，技术上有效解决了粘接，密封等问题，难以坚持修复和维修聚烯烃基材。 它代表了高性能聚烯烃和热塑性弹性体的粘接，密封和粘接修复应用系统制定重大进展。 由于主键X17HV含有挥发性溶剂，必须受聘于一个通风服用处理挥发包括高分子材料领域的所有必要的预防措施。

Master Bond Polymer System X17HV is a specially formulated one component polymer composition especially designed for bonding, sealing and repairing polyolefins such as polypropylene, polyethylene as well as their many co-polymers and blends including thermoplastic elastomers. This synthetic elastomer based compound exhibits a unique balance of both shear and peel properties when bonding such substrates to each other, as well as to related substrates including flexible PVC. Master Bond Polymer Systems X17HV contains 42-45% by weight solids and has a carefully formulated solvent blend which readily evaporates as cure proceeds. X17HV works best when surfaces are treated immediately after the application compound to each substrate. The strength of the initial set usually suffices to maintain the assembly in position for handling. Bond strength increases gradually as evaporation of the solvent progresses and with some adherents it might approach the strength of the substrate materials. Successive layers of Master Bond Polymer Systems X17HV can be applied to increase the thickness of X17HV polymer coating. Maximum bond strength is obtained upon complete evaporation of the solvent. Optimal performance bonds can be obtained at ambient temperatures within 12-24 hours. Although adding heat is not obligatory for curing, application of moderate heat (120°F-180°F) will greatly accelerate the rate of cure and also increase final bond strengths significantly. All substrates should be free of grease, dirt, oil and other contaminants for best results. Conventional cleaning methods such as solvent washing and vapor degreasing are recommended for maximum bond strength. This product function also an effective primer for polyolefins and various thermoplastic elastomer surfaces such as polyethylene and polypropylene per se and in conjunction with adhesives such as epoxies, urethanes, etc. Master Bond Polymer System X17HV is a high viscosity flowable liquid. It can be thinned with various ketone and aromatic solvents. Cured Master Bond Polymer X17HV sealant retains its outstanding strength properties even after prolonged exposure to water and many other chemicals including alcohols and aliphatic hydrocarbons. Cross hatch tape adhesion tests have given outstanding results after merely air dry curing methods. Master Bond Polymer System X17HV offers a simple to use, technically effective solution to the problem of bonding, sealing and repair such difficult to adhere and repair polyolefin substrates. It represents a major advance in the formulation of high performance polyolefin and thermoplastic elastomer bonding, sealing and repair applications bonding systems. Since Master Bond X17HV contains volatile solvents it must be employed in a ventilated area taking all necessary precautions for handling polymeric materials comprising of volatiles.

硕士邦德聚合物系统X17HV是一种专门配制的单组分聚合物组成专门设计用于粘接，密封和修复聚烯烃如聚丙烯，聚乙烯，以及他们的许多合作，包括聚合物和热塑性弹性体的混合物。 这种合成弹性体的复合呈现出两个剪切和剥离性能独特的平衡等基材粘接时给对方，以及包括软质PVC与基板。 硕士邦德聚合物系统X17HV含有42-45％重量的固体，并精心制定了混合溶剂的蒸发，容易与治疗的收益。 X17HV效果最好时表面后，立即应用到每个基复合治疗。 初始设置强度通常足以维持在位置处理大会。 粘结强度逐渐增大，作为溶剂蒸发的进展，并与一些信徒有可能接近的基板材料的强度。 硕士邦德聚合物系统X17HV连续层可用于增加X17HV聚合物涂层厚度。 粘结强度最大时，得到的溶剂完全蒸发。 最佳性能的债券可在12-24小时内环境温度。 虽然添加热不医治强制性的，温和的热应用（120 ° F – 180 ° F），将大大加快固化速度和最终粘接强度也显着增加。 所有基材应该是油脂，污垢，油和其他污染物的最佳效果。 如溶剂清洗和蒸汽脱脂常规清洗方法被推荐为最大粘接强度。 该产品的功能也为聚烯烃如聚乙烯和聚丙烯，本身与诸如环氧树脂，聚氨酯粘合剂结合各种热塑性弹性体表面的有效引物，聚合物等硕士邦德系统X17HV是一种高粘度流动性液体。 它可以稀释各种酮和芳香溶剂。 硕士邦德固化密封胶聚合物X17HV保留，即使长期暴露在水和醇，脂肪烃，包括许多其他化学品的实力突出特性。 十字划痕胶带附着力测试后给予只是空气干燥固化方法的优异成绩。 硕士邦德聚合物系统X17HV提供了一个简单易用，技术上有效解决了粘接，密封等问题，难以坚持修复和维修聚烯烃基材。 它代表了高性能聚烯烃和热塑性弹性体的粘接，密封和粘接修复应用系统制定重大进展。 由于主键X17HV含有挥发性溶剂，必须受聘于一个通风服用处理挥发包括高分子材料领域的所有必要的预防措施。

Master Bond Polymer System X17HV is a specially formulated one component polymer composition especially designed for bonding, sealing and repairing polyolefins such as polypropylene, polyethylene as well as their many co-polymers and blends including thermoplastic elastomers. This synthetic elastomer based compound exhibits a unique balance of both shear and peel properties when bonding such substrates to each other, as well as to related substrates including flexible PVC. Master Bond Polymer Systems X17HV contains 42-45% by weight solids and has a carefully formulated solvent blend which readily evaporates as cure proceeds. X17HV works best when surfaces are treated immediately after the application compound to each substrate. The strength of the initial set usually suffices to maintain the assembly in position for handling. Bond strength increases gradually as evaporation of the solvent progresses and with some adherents it might approach the strength of the substrate materials. Successive layers of Master Bond Polymer Systems X17HV can be applied to increase the thickness of X17HV polymer coating. Maximum bond strength is obtained upon complete evaporation of the solvent. Optimal performance bonds can be obtained at ambient temperatures within 12-24 hours. Although adding heat is not obligatory for curing, application of moderate heat (120°F-180°F) will greatly accelerate the rate of cure and also increase final bond strengths significantly. All substrates should be free of grease, dirt, oil and other contaminants for best results. Conventional cleaning methods such as solvent washing and vapor degreasing are recommended for maximum bond strength. This product function also an effective primer for polyolefins and various thermoplastic elastomer surfaces such as polyethylene and polypropylene per se and in conjunction with adhesives such as epoxies, urethanes, etc. Master Bond Polymer System X17HV is a high viscosity flowable liquid. It can be thinned with various ketone and aromatic solvents. Cured Master Bond Polymer X17HV sealant retains its outstanding strength properties even after prolonged exposure to water and many other chemicals including alcohols and aliphatic hydrocarbons. Cross hatch tape adhesion tests have given outstanding results after merely air dry curing methods. Master Bond Polymer System X17HV offers a simple to use, technically effective solution to the problem of bonding, sealing and repair such difficult to adhere and repair polyolefin substrates. It represents a major advance in the formulation of high performance polyolefin and thermoplastic elastomer bonding, sealing and repair applications bonding systems. Since Master Bond X17HV contains volatile solvents it must be employed in a ventilated area taking all necessary precautions for handling polymeric materials comprising of volatiles.