硕士邦德聚合物系统UV15X – 5是一种新开发的一个组成部分，不黄变，聚氨酯弹性体的紫外光固化系统具有高度的灵活性和出色的耐磨损性。 这种高粘度系统，可用于粘接，密封，涂层和铸造。 硕士邦德UV15X – 5提供优良的物理，包括高伸长率，高超的耐恶劣环境条件以及能够承受的热循环和热冲击强度和机械性能。 使用温度范围为-80 ° F至+250 ° F。 UV15X – 5债券很好地，包括玻璃，各种塑料，如聚碳酸酯和丙烯酸树脂，精选橡胶，金属等各种基材。 此外，硕士邦德UV15X – 5拥有出色的热性能和电气绝缘性能。 UV15X – 5是100％反应，不含有溶剂或其他挥发性物质。 与市售紫外灯固化“按需”可以生效，即1分钟，在环境温度或更低很短的时间段。 例如，当固化在较薄（10密耳或以下）与200瓦特汞蒸气在365 nm的连续光发射源的UV15X – 5，UV15X – 5将在10秒内治愈无粘性在40毫瓦的输出。 UV15X – 5可以治愈的厚度小于1 / 8的“厚虽然治愈不作为迅速，这将是在较薄的部分。硕士邦德聚合物系统UV15X – 5没有空气的抑制作用。无溶剂或其他挥发性物质是在固化过程中排放硕士邦德UV15X – 5包含一个异常活跃的紫外光固化引发剂使治愈甚至相对低强度的紫外线光源的实际，最后，虽然UV15X – 5具有较高的粘度，此功能是调节和降低粘度具有相似属性的也可用的。

Master Bond Polymer System UV15X-5 is a newly developed one component, non-yellowing, UV curable urethane elastomer system possessing high flexibility and outstanding abrasion resistance. This high viscosity system can be used for bonding, sealing, coating and casting. Master Bond UV15X-5 offers excellent physical strength properties including high elongation, superb resistance to severe environmental conditions as well as the ability to withstand thermal cycling and thermal and mechanical shock. The service temperature range is -80°F to +250°F. UV15X-5 bonds well to a variety of substrates including glass, various plastics such as polycarbonates and acrylics, selected rubbers, and metals. In addition, Master Bond UV15X-5 possesses excellent thermal and electrical insulation properties. UV15X-5 is 100% reactive and does not contain solvents or other volatiles. With commercially available UV lamps cures “on demand” can be effected in very short time periods i.e. 1 minute or less at ambient temperatures. For example, when curing the UV15X-5 in thinner sections (10 mils or less) with a 200 watt mercury vapor continuous light source emitting at 365 nm, UV15X-5 will cure tack free within 10 seconds at 40 milliwatts of output. UV15X-5 will cure in thickness greater than 1/8″ thick although the cure is not as rapid as it would be in thinner sections. Master Bond Polymer System UV15X-5 is not air inhibited. No solvents or other volatiles are emitted during cure. Master Bond UV15X-5 contains an exceptionally active UV curing initiator which makes cures practical even with relatively low intensity UV light sources. Finally, although UV15X-5 has a relatively high viscosity, this feature is adjustable and lower viscosity’s with similar properties are also available.

硕士邦德聚合物系统UV15X – 5是一种新开发的一个组成部分，不黄变，聚氨酯弹性体的紫外光固化系统具有高度的灵活性和出色的耐磨损性。 这种高粘度系统，可用于粘接，密封，涂层和铸造。 硕士邦德UV15X – 5提供优良的物理，包括高伸长率，高超的耐恶劣环境条件以及能够承受的热循环和热冲击强度和机械性能。 使用温度范围为-80 ° F至+250 ° F。 UV15X – 5债券很好地，包括玻璃，各种塑料，如聚碳酸酯和丙烯酸树脂，精选橡胶，金属等各种基材。 此外，硕士邦德UV15X – 5拥有出色的热性能和电气绝缘性能。 UV15X – 5是100％反应，不含有溶剂或其他挥发性物质。 与市售紫外灯固化“按需”可以生效，即1分钟，在环境温度或更低很短的时间段。 例如，当固化在较薄（10密耳或以下）与200瓦特汞蒸气在365 nm的连续光发射源的UV15X – 5，UV15X – 5将在10秒内治愈无粘性在40毫瓦的输出。 UV15X – 5可以治愈的厚度小于1 / 8的“厚虽然治愈不作为迅速，这将是在较薄的部分。硕士邦德聚合物系统UV15X – 5没有空气的抑制作用。无溶剂或其他挥发性物质是在固化过程中排放硕士邦德UV15X – 5包含一个异常活跃的紫外光固化引发剂使治愈甚至相对低强度的紫外线光源的实际，最后，虽然UV15X – 5具有较高的粘度，此功能是调节和降低粘度具有相似属性的也可用的。

Master Bond Polymer System UV15X-5 is a newly developed one component, non-yellowing, UV curable urethane elastomer system possessing high flexibility and outstanding abrasion resistance. This high viscosity system can be used for bonding, sealing, coating and casting. Master Bond UV15X-5 offers excellent physical strength properties including high elongation, superb resistance to severe environmental conditions as well as the ability to withstand thermal cycling and thermal and mechanical shock. The service temperature range is -80°F to +250°F. UV15X-5 bonds well to a variety of substrates including glass, various plastics such as polycarbonates and acrylics, selected rubbers, and metals. In addition, Master Bond UV15X-5 possesses excellent thermal and electrical insulation properties. UV15X-5 is 100% reactive and does not contain solvents or other volatiles. With commercially available UV lamps cures “on demand” can be effected in very short time periods i.e. 1 minute or less at ambient temperatures. For example, when curing the UV15X-5 in thinner sections (10 mils or less) with a 200 watt mercury vapor continuous light source emitting at 365 nm, UV15X-5 will cure tack free within 10 seconds at 40 milliwatts of output. UV15X-5 will cure in thickness greater than 1/8″ thick although the cure is not as rapid as it would be in thinner sections. Master Bond Polymer System UV15X-5 is not air inhibited. No solvents or other volatiles are emitted during cure. Master Bond UV15X-5 contains an exceptionally active UV curing initiator which makes cures practical even with relatively low intensity UV light sources. Finally, although UV15X-5 has a relatively high viscosity, this feature is adjustable and lower viscosity’s with similar properties are also available.