硕士邦德聚合物系统UV71DC是一个新的组件，光学透明UV / RTV固化非黄变高性能粘接，密封和涂层有机硅化合物。 它是100％反应，不含有任何溶剂或其他稀释剂。 当暴露在适当波长和强度的紫外线光源，它固化迅速生产出优良的电绝缘性能清晰，耐用，灵活，不黄变和耐化学性粘合剂，密封剂和涂料。 另外，RTV治疗可以在24小时内完成在环境温度或较高温度下更快。 紫外线或RTV固化材料可以采用以上的-80 ° F温度范围宽至+400 ° F。 它已经制定了有一个1.41的折射率。 与许多其他商用紫外线产品，硕士邦德UV71DC聚合物系统的治疗是不抑制空气和展品一个理想的环境温度下固化速度快。 具体的治疗时间取决于紫外线灯，灯的从UV71DC表面的距离，第厚度被治愈等类型的典型紫外线固化时间范围从几秒钟到2-3分钟，在环境温度。 最大吸收发生在280-370纳米范围内进行。 200瓦特/线性英寸的中压汞蒸气灯或同等紫外线光源建议。 无溶剂或蒸气释放在固化过程。 固化胶粘剂展出，包括优秀的耐用性，柔韧性，抗热震性以及优异的附着力许多从玻璃和铝聚酯薄膜和聚碳酸酯不同基材性能最理想的组合。 该UV71DC有机硅聚合物的储存稳定性超过在原下，未开封的容器通常的储存条件3个月。

Master Bond Polymer System UV71DC is a new one component, optically clear UV/RTV curable non-yellowing silicone compound for high performance bonding, sealing and coating. It is 100% reactive and does not contain any solvents or other diluents. When exposed to a source of UV light of appropriate wave length and intensity, it cures promptly to produce clear, durable, flexible, non-yellowing and chemically resistant adhesives, sealants or coatings with excellent electrical insulation properties. Alternatively, RTV cures can be accomplished within 24 hours at ambient temperatures or faster at elevated temperatures. The UV or RTV cured material can be employed over the wide temperature range of -80°F to +400°F. It has been formulated to have a refractive index of 1.41. Unlike many other commercially available UV products, the Master Bond UV71DC polymer system’s cure is not inhibited by air and exhibits a desirable fast curing rate at ambient temperatures. Specific cure times depend on the type of UV lamp, the distance of the lamp from the surface of the UV71DC, thickness of section to be cured, etc. Typical UV cure times range from several seconds to 2-3 minutes at ambient temperatures. Maximum absorption takes place in the 280-370 nanometer range. 200 watt/linear inch medium pressure mercury vapor lamps or equivalent UV light sources are recommended. No solvents or vapors are released during the curing process. Cured adhesives exhibit a most desirable combination of properties including outstanding durability, flexibility, thermal shock resistance as well as excellent adhesion to many different substrates ranging from glass and aluminum to polyester films and polycarbonates. The storage stability of the UV71DC silicone polymer exceeds 3 months under usual storage conditions in their original, unopened containers.

硕士邦德聚合物系统UV71DC是一个新的组件，光学透明UV / RTV固化非黄变高性能粘接，密封和涂层有机硅化合物。 它是100％反应，不含有任何溶剂或其他稀释剂。 当暴露在适当波长和强度的紫外线光源，它固化迅速生产出优良的电绝缘性能清晰，耐用，灵活，不黄变和耐化学性粘合剂，密封剂和涂料。 另外，RTV治疗可以在24小时内完成在环境温度或较高温度下更快。 紫外线或RTV固化材料可以采用以上的-80 ° F温度范围宽至+400 ° F。 它已经制定了有一个1.41的折射率。 与许多其他商用紫外线产品，硕士邦德UV71DC聚合物系统的治疗是不抑制空气和展品一个理想的环境温度下固化速度快。 具体的治疗时间取决于紫外线灯，灯的从UV71DC表面的距离，第厚度被治愈等类型的典型紫外线固化时间范围从几秒钟到2-3分钟，在环境温度。 最大吸收发生在280-370纳米范围内进行。 200瓦特/线性英寸的中压汞蒸气灯或同等紫外线光源建议。 无溶剂或蒸气释放在固化过程。 固化胶粘剂展出，包括优秀的耐用性，柔韧性，抗热震性以及优异的附着力许多从玻璃和铝聚酯薄膜和聚碳酸酯不同基材性能最理想的组合。 该UV71DC有机硅聚合物的储存稳定性超过在原下，未开封的容器通常的储存条件3个月。

Master Bond Polymer System UV71DC is a new one component, optically clear UV/RTV curable non-yellowing silicone compound for high performance bonding, sealing and coating. It is 100% reactive and does not contain any solvents or other diluents. When exposed to a source of UV light of appropriate wave length and intensity, it cures promptly to produce clear, durable, flexible, non-yellowing and chemically resistant adhesives, sealants or coatings with excellent electrical insulation properties. Alternatively, RTV cures can be accomplished within 24 hours at ambient temperatures or faster at elevated temperatures. The UV or RTV cured material can be employed over the wide temperature range of -80°F to +400°F. It has been formulated to have a refractive index of 1.41. Unlike many other commercially available UV products, the Master Bond UV71DC polymer system’s cure is not inhibited by air and exhibits a desirable fast curing rate at ambient temperatures. Specific cure times depend on the type of UV lamp, the distance of the lamp from the surface of the UV71DC, thickness of section to be cured, etc. Typical UV cure times range from several seconds to 2-3 minutes at ambient temperatures. Maximum absorption takes place in the 280-370 nanometer range. 200 watt/linear inch medium pressure mercury vapor lamps or equivalent UV light sources are recommended. No solvents or vapors are released during the curing process. Cured adhesives exhibit a most desirable combination of properties including outstanding durability, flexibility, thermal shock resistance as well as excellent adhesion to many different substrates ranging from glass and aluminum to polyester films and polycarbonates. The storage stability of the UV71DC silicone polymer exceeds 3 months under usual storage conditions in their original, unopened containers.

硕士邦德聚合物系统UV71DC是一个新的组件，光学透明UV / RTV固化非黄变高性能粘接，密封和涂层有机硅化合物。 它是100％反应，不含有任何溶剂或其他稀释剂。 当暴露在适当波长和强度的紫外线光源，它固化迅速生产出优良的电绝缘性能清晰，耐用，灵活，不黄变和耐化学性粘合剂，密封剂和涂料。 另外，RTV治疗可以在24小时内完成在环境温度或较高温度下更快。 紫外线或RTV固化材料可以采用以上的-80 ° F温度范围宽至+400 ° F。 它已经制定了有一个1.41的折射率。 与许多其他商用紫外线产品，硕士邦德UV71DC聚合物系统的治疗是不抑制空气和展品一个理想的环境温度下固化速度快。 具体的治疗时间取决于紫外线灯，灯的从UV71DC表面的距离，第厚度被治愈等类型的典型紫外线固化时间范围从几秒钟到2-3分钟，在环境温度。 最大吸收发生在280-370纳米范围内进行。 200瓦特/线性英寸的中压汞蒸气灯或同等紫外线光源建议。 无溶剂或蒸气释放在固化过程。 固化胶粘剂展出，包括优秀的耐用性，柔韧性，抗热震性以及优异的附着力许多从玻璃和铝聚酯薄膜和聚碳酸酯不同基材性能最理想的组合。 该UV71DC有机硅聚合物的储存稳定性超过在原下，未开封的容器通常的储存条件3个月。

Master Bond Polymer System UV71DC is a new one component, optically clear UV/RTV curable non-yellowing silicone compound for high performance bonding, sealing and coating. It is 100% reactive and does not contain any solvents or other diluents. When exposed to a source of UV light of appropriate wave length and intensity, it cures promptly to produce clear, durable, flexible, non-yellowing and chemically resistant adhesives, sealants or coatings with excellent electrical insulation properties. Alternatively, RTV cures can be accomplished within 24 hours at ambient temperatures or faster at elevated temperatures. The UV or RTV cured material can be employed over the wide temperature range of -80°F to +400°F. It has been formulated to have a refractive index of 1.41. Unlike many other commercially available UV products, the Master Bond UV71DC polymer system’s cure is not inhibited by air and exhibits a desirable fast curing rate at ambient temperatures. Specific cure times depend on the type of UV lamp, the distance of the lamp from the surface of the UV71DC, thickness of section to be cured, etc. Typical UV cure times range from several seconds to 2-3 minutes at ambient temperatures. Maximum absorption takes place in the 280-370 nanometer range. 200 watt/linear inch medium pressure mercury vapor lamps or equivalent UV light sources are recommended. No solvents or vapors are released during the curing process. Cured adhesives exhibit a most desirable combination of properties including outstanding durability, flexibility, thermal shock resistance as well as excellent adhesion to many different substrates ranging from glass and aluminum to polyester films and polycarbonates. The storage stability of the UV71DC silicone polymer exceeds 3 months under usual storage conditions in their original, unopened containers.