硕士邦德UV14 – 3是一个新的组件，灵活与方便的功能，很容易被通过最传统的溶剂可移动的粘接，密封和涂层，紫外线固化聚合物体系。 它是100％的反应，其中不含任何溶剂或其他挥发性物质在常温下粘度适中液体。 当接触到的紫外线光源，硕士邦德聚合物系统UV14 – 3作为一个持久的，艰难的，不黄变系统，可用于粘合剂，密封剂和涂料固化。 UV14 – 3还具有优良的电绝缘性能。 最大吸收紫外线的能量在250-365纳米范围内进行。 固化涂料，粘合剂和密封剂，可用于在极宽的温度范围为-60 ° F到250楼 与其他许多市售的紫外光固化产品，硕士邦德聚合物系统UV14 – 3是不是氧抑制和展品一个刻意快速固化速度在空气的存在，即使在环境温度。 硕士邦德聚合物系统UV14 – 3可以治愈更大的切片厚度（1 / 8英寸深）相比，最传统的紫外线型系统，使各种电子和光电子灌封和封装应用价值。 这种性能特点是由于其独特有效的催化剂体系。 另一个值得注意的UV14 – 3财产是其高度的灵活性，赋予优良的震动和冲击以及卓越的能力承受热循环和热冲击。 最重要的是，UV14 – 3很容易遭到大多数溶剂使其成为理想选择当紫外线系统必须很容易地删除。 硕士邦德聚合物体系UV14 – 3是可以治愈的在很短的时间周期取决于型的紫外灯，灯的距离，从表面的UV14 – 3，要使用的UV14 – 3部分的厚度等典型固化200瓦/英寸的中压汞蒸气灯建议。 固化500ft./minute和高线速度已经获得了UV14 – 3聚合物系统的薄膜。 在固化过程中无溶剂或其他挥发性物质被释放。 UV14 – 3提供了出色的耐用性，韧性和抗热震性以及优异的附着力，以各种与能力相结合，可以很容易地除去溶剂，如丙酮，二甲苯和MEK的基板等的贮存稳定性的理想组合硕士邦德聚合物体系在室温下6个月，在原始的，未开封的容器。

Master Bond UV14-3 is a new one component, flexible, UV curable polymer system for bonding, sealing and coating with the convenient feature of being readily removable by most conventional solvents. It is a 100% reactive, moderate viscosity liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a UV light source, Master Bond Polymer System UV14-3 cures as a durable, tough, non-yellowing system which can be used as an adhesive, sealant and coating. UV14-3 also possesses excellent electrical insulation properties. Maximum absorption of UV energy takes place in the 250-365 nanometer range. The cured coatings, adhesives and sealants can be used over the exceptionally wide temperature range of -60°F to +250F. Unlike many other commercially available UV curing products, the Master Bond Polymer System UV14-3 is not oxygen inhibited and exhibits a desirably fast curing rate at ambient temperatures even in the presence of air. The Master Bond Polymer System UV14-3 can be cured in much greater section thickness (up to 1/8 inch deep) compared to most conventional UV type systems, making it of value for various electronic and opto-electronic potting and encapsulation applications. This performance characteristic is due to its uniquely effective catalyst system. Another noteworthy property of the UV14-3 is its high flexibility which imparts excellent vibration and shock resistance as well as superior ability to withstand thermal cycling and thermal shock. Most importantly, UV14-3 is readily attacked by most solvents making it the ideal selection when the UV system must be easily removed. Master Bond Polymer System UV14-3 can be cured in very short time periods depending upon type of UV lamp, distance of the lamp from the surface of the UV14-3, thickness of the section of the UV14-3 to be used, etc. Typical cure 200 watt/inch medium pressure mercury vapor lamps are recommended. Curing line speeds as high as 500ft./minute and more have been obtained for thin films of the UV14-3 polymer system. No solvents or other volatiles are released during the curing process. UV14-3 offers the desirable combination of outstanding durability, toughness and thermal shock resistance as well as excellent adhesion to a variety of substrates combined with the ability to be easily removed by solvents such as acetone, xylene and MEK, etc. The storage stability of the Master Bond Polymer System is 6 months at room temperature in the original, unopened containers.

硕士邦德UV14 – 3是一个新的组件，灵活与方便的功能，很容易被通过最传统的溶剂可移动的粘接，密封和涂层，紫外线固化聚合物体系。 它是100％的反应，其中不含任何溶剂或其他挥发性物质在常温下粘度适中液体。 当接触到的紫外线光源，硕士邦德聚合物系统UV14 – 3作为一个持久的，艰难的，不黄变系统，可用于粘合剂，密封剂和涂料固化。 UV14 – 3还具有优良的电绝缘性能。 最大吸收紫外线的能量在250-365纳米范围内进行。 固化涂料，粘合剂和密封剂，可用于在极宽的温度范围为-60 ° F到250楼 与其他许多市售的紫外光固化产品，硕士邦德聚合物系统UV14 – 3是不是氧抑制和展品一个刻意快速固化速度在空气的存在，即使在环境温度。 硕士邦德聚合物系统UV14 – 3可以治愈更大的切片厚度（1 / 8英寸深）相比，最传统的紫外线型系统，使各种电子和光电子灌封和封装应用价值。 这种性能特点是由于其独特有效的催化剂体系。 另一个值得注意的UV14 – 3财产是其高度的灵活性，赋予优良的震动和冲击以及卓越的能力承受热循环和热冲击。 最重要的是，UV14 – 3很容易遭到大多数溶剂使其成为理想选择当紫外线系统必须很容易地删除。 硕士邦德聚合物体系UV14 – 3是可以治愈的在很短的时间周期取决于型的紫外灯，灯的距离，从表面的UV14 – 3，要使用的UV14 – 3部分的厚度等典型固化200瓦/英寸的中压汞蒸气灯建议。 固化500ft./minute和高线速度已经获得了UV14 – 3聚合物系统的薄膜。 在固化过程中无溶剂或其他挥发性物质被释放。 UV14 – 3提供了出色的耐用性，韧性和抗热震性以及优异的附着力，以各种与能力相结合，可以很容易地除去溶剂，如丙酮，二甲苯和MEK的基板等的贮存稳定性的理想组合硕士邦德聚合物体系在室温下6个月，在原始的，未开封的容器。

Master Bond UV14-3 is a new one component, flexible, UV curable polymer system for bonding, sealing and coating with the convenient feature of being readily removable by most conventional solvents. It is a 100% reactive, moderate viscosity liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a UV light source, Master Bond Polymer System UV14-3 cures as a durable, tough, non-yellowing system which can be used as an adhesive, sealant and coating. UV14-3 also possesses excellent electrical insulation properties. Maximum absorption of UV energy takes place in the 250-365 nanometer range. The cured coatings, adhesives and sealants can be used over the exceptionally wide temperature range of -60°F to +250F. Unlike many other commercially available UV curing products, the Master Bond Polymer System UV14-3 is not oxygen inhibited and exhibits a desirably fast curing rate at ambient temperatures even in the presence of air. The Master Bond Polymer System UV14-3 can be cured in much greater section thickness (up to 1/8 inch deep) compared to most conventional UV type systems, making it of value for various electronic and opto-electronic potting and encapsulation applications. This performance characteristic is due to its uniquely effective catalyst system. Another noteworthy property of the UV14-3 is its high flexibility which imparts excellent vibration and shock resistance as well as superior ability to withstand thermal cycling and thermal shock. Most importantly, UV14-3 is readily attacked by most solvents making it the ideal selection when the UV system must be easily removed. Master Bond Polymer System UV14-3 can be cured in very short time periods depending upon type of UV lamp, distance of the lamp from the surface of the UV14-3, thickness of the section of the UV14-3 to be used, etc. Typical cure 200 watt/inch medium pressure mercury vapor lamps are recommended. Curing line speeds as high as 500ft./minute and more have been obtained for thin films of the UV14-3 polymer system. No solvents or other volatiles are released during the curing process. UV14-3 offers the desirable combination of outstanding durability, toughness and thermal shock resistance as well as excellent adhesion to a variety of substrates combined with the ability to be easily removed by solvents such as acetone, xylene and MEK, etc. The storage stability of the Master Bond Polymer System is 6 months at room temperature in the original, unopened containers.

硕士邦德UV14 – 3是一个新的组件，灵活与方便的功能，很容易被通过最传统的溶剂可移动的粘接，密封和涂层，紫外线固化聚合物体系。 它是100％的反应，其中不含任何溶剂或其他挥发性物质在常温下粘度适中液体。 当接触到的紫外线光源，硕士邦德聚合物系统UV14 – 3作为一个持久的，艰难的，不黄变系统，可用于粘合剂，密封剂和涂料固化。 UV14 – 3还具有优良的电绝缘性能。 最大吸收紫外线的能量在250-365纳米范围内进行。 固化涂料，粘合剂和密封剂，可用于在极宽的温度范围为-60 ° F到250楼 与其他许多市售的紫外光固化产品，硕士邦德聚合物系统UV14 – 3是不是氧抑制和展品一个刻意快速固化速度在空气的存在，即使在环境温度。 硕士邦德聚合物系统UV14 – 3可以治愈更大的切片厚度（1 / 8英寸深）相比，最传统的紫外线型系统，使各种电子和光电子灌封和封装应用价值。 这种性能特点是由于其独特有效的催化剂体系。 另一个值得注意的UV14 – 3财产是其高度的灵活性，赋予优良的震动和冲击以及卓越的能力承受热循环和热冲击。 最重要的是，UV14 – 3很容易遭到大多数溶剂使其成为理想选择当紫外线系统必须很容易地删除。 硕士邦德聚合物体系UV14 – 3是可以治愈的在很短的时间周期取决于型的紫外灯，灯的距离，从表面的UV14 – 3，要使用的UV14 – 3部分的厚度等典型固化200瓦/英寸的中压汞蒸气灯建议。 固化500ft./minute和高线速度已经获得了UV14 – 3聚合物系统的薄膜。 在固化过程中无溶剂或其他挥发性物质被释放。 UV14 – 3提供了出色的耐用性，韧性和抗热震性以及优异的附着力，以各种与能力相结合，可以很容易地除去溶剂，如丙酮，二甲苯和MEK的基板等的贮存稳定性的理想组合硕士邦德聚合物体系在室温下6个月，在原始的，未开封的容器。

Master Bond UV14-3 is a new one component, flexible, UV curable polymer system for bonding, sealing and coating with the convenient feature of being readily removable by most conventional solvents. It is a 100% reactive, moderate viscosity liquid at ambient temperatures which does not contain any solvents or other volatiles. When exposed to a UV light source, Master Bond Polymer System UV14-3 cures as a durable, tough, non-yellowing system which can be used as an adhesive, sealant and coating. UV14-3 also possesses excellent electrical insulation properties. Maximum absorption of UV energy takes place in the 250-365 nanometer range. The cured coatings, adhesives and sealants can be used over the exceptionally wide temperature range of -60°F to +250F. Unlike many other commercially available UV curing products, the Master Bond Polymer System UV14-3 is not oxygen inhibited and exhibits a desirably fast curing rate at ambient temperatures even in the presence of air. The Master Bond Polymer System UV14-3 can be cured in much greater section thickness (up to 1/8 inch deep) compared to most conventional UV type systems, making it of value for various electronic and opto-electronic potting and encapsulation applications. This performance characteristic is due to its uniquely effective catalyst system. Another noteworthy property of the UV14-3 is its high flexibility which imparts excellent vibration and shock resistance as well as superior ability to withstand thermal cycling and thermal shock. Most importantly, UV14-3 is readily attacked by most solvents making it the ideal selection when the UV system must be easily removed. Master Bond Polymer System UV14-3 can be cured in very short time periods depending upon type of UV lamp, distance of the lamp from the surface of the UV14-3, thickness of the section of the UV14-3 to be used, etc. Typical cure 200 watt/inch medium pressure mercury vapor lamps are recommended. Curing line speeds as high as 500ft./minute and more have been obtained for thin films of the UV14-3 polymer system. No solvents or other volatiles are released during the curing process. UV14-3 offers the desirable combination of outstanding durability, toughness and thermal shock resistance as well as excellent adhesion to a variety of substrates combined with the ability to be easily removed by solvents such as acetone, xylene and MEK, etc. The storage stability of the Master Bond Polymer System is 6 months at room temperature in the original, unopened containers.